GFUVE T-3630E-A Multifunction Earth Ground Resistance Tester (2/3/4-wire, 0.00kΩ~200.00kΩ, 0.00Ωm~9999kΩm)
Function: Two/Three/Four-wire AC ground resistance- Soil resistivity, Three/Four-wire selective method, Dual-clamp resistance, DC resistance, AC voltage, AC current, DC voltage
Accuracy: 2%
Power Supply: DC 12V(4.5AH battery, continuous standby for 300 hours)
Measuring mode: Precise 4-pole measurement, 3-pole measurement, simple 2-pole measurement, selection method, double clamp method measure grounding resistance
Measuring method:
2/3/4-wire method measurement: Polarity - changing method, measurement current 42.0mA Max
Soil resistivity: Four - pole method
Selective measurement: Polarity - changing method, measurement current 42.0mA Max
Dual - clamp method: Non - contact mutual induction measurement method, test current 40mA Max
DC resistance: Polarity - changing method
AC current: Average value rectification (clamp - type)
Ground voltage: Average value rectification (between S - ES interfaces)
DC voltage: Average value rectification (between S - ES interfaces)
Measuring Rate:
AC current: about 2 times/second
Voltage to ground: about 2 times/second
Earth resistance, soil resistivity: about 7 seconds/time
Measuring times: Over 5000 times (Short-circuit test, interval time should be at least 30 seconds)
Earth resistance range: 0Ω - 200.00KΩ
Resolution: 0.01Ω/0.1Ω/1Ω/10Ω
Soil resistivity range: 0.00Ωm - 9999kΩm
Resolution: 0.01Ωm/0.1Ωm/1Ωm/10Ωm/100Ωm/1kΩm
Earth voltage range: 0 - 750V; Resolution: 0.01V
Clamp AC current range: 0 - 1000A; Resolution: 0.1mA
Test voltage wave: Sine wave
Test frequency: 128Hz
Short-circuit test current: AC 42mA max
Open-circuit test current: AC 30.0V Max DC 30.0V Max
Electrode distance range: 0.1m-100.0m
Backlight: Yes
LCD display: Color - display screen, 5 inch touch, 850×480, 108mm×65mm
Communication: USB port
Data storage: 500 groups
Alarm function: Yes
Power consumption:
Screen brightness: 190mA Max(maximum brightness) 140mA Min(minimum brightness)
Measurement: 200mA Max(maximum brightness) 150mA Min(minimum brightness)
Overload protection: Measurement of ground-to-earth voltage: H - E, S - E (port - to - port) AC 280V/3 seconds
Insulation resistance: Over 20MΩ (between circuit and enclosure it is 500V)
Withstand voltage: AC 3700V/rms. (between the circuit and the shell)
Mechanical parameters
Dimensions (L×W×H)(mm): 277.2mm×227.5mm×153mm
Size of clamp(L×W×H)(mm): 101mm×27mm×214mm
Standard test wire: 4 wires: each for red 15m, black 15m, yellow 10m, and green 10m
Simple test wire: 2 wires: each for yellow 1.5m and green 1.5m
Auxiliary grounding rod4 wires: Φ10mm×200mm Over 5000 times (Short-circuit test, interval time should be at least 30 seconds)
1000A current clamp (optional): 2pcs: 1 blue-banana plug and 1 blue-audio plug. 50mm diameter, 1000:1, 2m
Weight (kg):
Total weight: 7.6kg (including package)
Tester: 1975g (including battery)
Testing wires: 1300g
Auxiliary grounding rods: 850g (4pcs)
Current clamp:940g (2pcs) optional
Environmental conditions
Operating temperature: -10°C to +50°C
Storage temperature: -40°C to 70°C
Relative humidity: ≤90%RH
인증된 전문가에게 직접 연결

