GW INSTEK LCR-8205A 고주파 LCR 미터 (DC, 10Hz~5MHz)

Test frequency: DC, 10hz~5MHz; 6 digits, ±0.0007%       

Output impedance: 25ω / 100ω selectable

Basic accuracy: ±0.08%

Test speed: max: 2.5ms(>10khz), fast: 50ms(>20hz), medium: 100ms slow: 300ms, slow2: 600ms

Test signal level

AC voltage: 10mV ~ 2Vrms (freq. ≦1MHz), 10mV ~ 1Vrms (freq. > 1MHz or freq. ≦1MHz and RO=25ω)

AC current: 100μA~ 20mArms (ro=100ω), 400μA ~ 40mArms (RO=25ω) 

DCR voltage: 1VDC (40mA max.)

Measurement parameters

Maximum four parameters can be measured and displayed at the same time

Impedance (Z), inductance (Ls / Lp), capacitance (Cs / Cp), AC resistance (Rs / Rp), quality factor (Q), dissipation factor (D), admittance (Y), conductance (G), reactance (X), phase angle (θd / θr), susceptance (B), DC Resistance (RDC)

List measurement

Listed steps: 15

Listed parameters: freq/vac/iac/dc bias/comp/bin 

Trigger: auto, repeat, single      

Sweep measurement

Swept graphical: two of measurement parameters

Swept parameters: freq/Vac/Iac, keep trace

Equivalent circuit model analysis (“A” series only): 

7 different equivalent circuit models. The 3-components analysis model is composed of 4 types, and the 4-components analysis model covers 3 types.

Other functions

Auto level control (ALC): standard 

DC bias: 0 ~ ±12V

Handler: PASS, FAIL and OK, NG or BIN 1-9

Other features

Correction: open/short/hf load/load

V/i monitor: vac, iac, vdc, idc

Comparator: value, δ, δ% 

Buzzer: off, pass, fail

Average: 1 to 64             

Display: 7" LCD color display (800 x 480)

Interface: USB / GPIB / LAN / RS-232 / HANDLER / USB HOST /trigger input

Power source: AC 100V~240V, 50/60hz; consumption: 65VA (max.)

Dimensions & weight: 346 (w) x 145 (h) x 335 (d) mm; approx. 3.3kg

Datasheet