빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
|
PSM-2010
|
|
||
|
DC OUTPUT |
|||
| Low Range |
0~8V/20A
|
|
|
| High Range |
0~20V/10A
|
|
|
|
CONSTANT VOLTAGE OPERATION |
|||
| Regulation + (% of output + offset) | Load regulation < 0.01% + 2mV Line regulation < 0.01% + 2mV |
||
| Ripple & Noise | < 350 μVrms/3mVpp | ||
|
CONSTANT CURRENT OPERATION |
|||
| Regulation + (% of output + offset) | Load regulation < 0.01% + 250μA Line regulation < 0.01% + 250μA |
||
| Ripple & Noise | < 2mArms | ||
|
RESOLUTION |
|||
| Programming Voltage |
1mV
|
|
|
| Programming Current |
1mA
|
|
|
| Readback Voltage |
0.5mV
|
|
|
| Readback Current |
1mA
|
|
|
| Front Panel Voltage | 1mV | ||
| Front Panel Current | 1mA ( <10a 10ma="" u="">>10A ) | ||
| OVP/OCP Voltage | 10mV | ||
| OVP/OCP Current | 10mA | ||
|
ACCURACY |
|||
| Programming Voltage | 0.05% + 10mV | ||
| Programming Current | 0.2% + 10mA | ||
| Readback Voltage | 0.05% + 5mV | ||
| Readback Current | 0.15% + 5mA | ||
| OVP/OCP Voltage | 0.1% + 10mV | ||
| OVP/OCP Current | 0.4% + 10mA | ||
|
TRANSIENT RESPONSE |
|||
| < 50μsec (for output to recover within 15mV following a change in output current from full load to half load) | |||
|
COMMAND PROCESSING TIME |
|||
| 100ms | |||
|
VOLTAGE PROGRAMMING RESPONSE TIME (for resistive load) |
|||
| Voltage Up Full Load |
95mS
|
|
|
| Voltage Up No Load |
45mS
|
|
|
| Voltage Down Full Load |
30mS
|
|
|
| Voltage Down No Load |
450mS
|
|
|
|
STABILITY (% of output + offset) |
|||
| Voltage | 0.02% + 1mV | ||
| Current | 0.1% + 1mA | ||
|
MEMORY |
|||
| Store/Recall 100 sets | |||
|
TEMPERATURE COEFFICIENT PER±(% of output + offset) |
|||
| Voltage | 0.01% + 3mV | ||
| Current | 0.02% + 3mA | ||
|
INTERFACE |
|||
| Standard : RS-232C, GPIB | |||
| POWER SOURCE | |||
| AC100V/120V/220V±10%, 230V-6%~+10%, 50/60Hz | |||
| DIMENSIONS & WEIGHT | |||
| 230(W) x 140(H) x 380(D)mm Approx. 10kg |
|||
