GW INSTEK GOS-620 Gwinstek GOS-620 아날로그 오실로스코프 (20Mhz, 2CH) | EMIN.VN

Product image

GW INSTEK GOS-620 Gwinstek GOS-620 아날로그 오실로스코프 (20Mhz, 2CH)

제조사GW INSTEK(이 브랜드의 다른 제품 보기)

ModelGOS-620

원산지Taiwan

문의하기

수량

안전한 결제

품질 보장

간편 교환 및 반품

배송 가능

Warranty: 12 months
Manufacturer: Gwinstek - Taiwan
Origin: China

CRT
Type	6-inch rectangular type with internal graticule 8 x 10 div (1div=1cm)
Z-Axis Input	Input Impedance: Approx. 47kΩ Sensitivity: Above 5Vp-p Bandwidth: DC ~ 2MHz
VERTICAL SYSTEM
Sensitivity	5mV/div~5V/div±3%,x5MAG±5%
Bandwidth	DC (AC 10Hz) ~ 20MHz(-3dB) DC (AC 10Hz) ~ 7MHz(-3dB) at x5MAG
Rise Time	17.5ns (50ns at x5MAG)
Input Impedance	Approx. 1MΩ
Input Coupling	AC, DC, GND
Vertical Mode	CH1, CH2, DUAL (ALT/CHOP), ADD, CH2 INV
HORIZONTAL SYSTEM
Sweep Time	0.2μs ~ 0.5s/div±3% 100ns ~ 50ms/div±5% (x 10 MAG) 20ns ~ 50ns/div : uncalibrated
TRIGGER
Trigger Mode	AUTO, NORM, TV-V, TV-H
Trigger Source	CH1, CH2, ALT, LINE, EXT
Trigger Coupling	AC
Trigger Slope	"+" or "-"
X - Y OPERATION
Sensitivity	5mV ~ 5V/div±4%
X-axis Bandwidth	DC ~ 500kHz
Phase Error	3° or less from DC ~ 50kHz
OUTPUT SIGNAL
CH1 Signal Output	Voltage: approx. 20mV/div into 50Ω
Calibrator Output	1kHz Square wave, 2Vp-p±2%
POWER SOURCE
	AC 115V/230V±15%, 50Hz/60Hz
DIMENSIONS & WEIGHT
	310(W) x 150(H) x 455(D) mm; Approx. 8kg

CRT
Type	6-inch rectangular type with internal graticule 8 x 10 div (1div=1cm)
Z-Axis Input	Input Impedance: Approx. 47kΩ Sensitivity: Above 5Vp-p Bandwidth: DC ~ 2MHz
VERTICAL SYSTEM
Sensitivity	5mV/div~5V/div±3%,x5MAG±5%
Bandwidth	DC (AC 10Hz) ~ 20MHz(-3dB) DC (AC 10Hz) ~ 7MHz(-3dB) at x5MAG
Rise Time	17.5ns (50ns at x5MAG)
Input Impedance	Approx. 1MΩ
Input Coupling	AC, DC, GND
Vertical Mode	CH1, CH2, DUAL (ALT/CHOP), ADD, CH2 INV
HORIZONTAL SYSTEM
Sweep Time	0.2μs ~ 0.5s/div±3% 100ns ~ 50ms/div±5% (x 10 MAG) 20ns ~ 50ns/div : uncalibrated
TRIGGER
Trigger Mode	AUTO, NORM, TV-V, TV-H
Trigger Source	CH1, CH2, ALT, LINE, EXT
Trigger Coupling	AC
Trigger Slope	"+" or "-"
X - Y OPERATION
Sensitivity	5mV ~ 5V/div±4%
X-axis Bandwidth	DC ~ 500kHz
Phase Error	3° or less from DC ~ 50kHz
OUTPUT SIGNAL
CH1 Signal Output	Voltage: approx. 20mV/div into 50Ω
Calibrator Output	1kHz Square wave, 2Vp-p±2%
POWER SOURCE
	AC 115V/230V±15%, 50Hz/60Hz
DIMENSIONS & WEIGHT
	310(W) x 150(H) x 455(D) mm; Approx. 8kg