HAKKO FR-702 유선 코드 (1430W) (FR-4103 재 작업 시스템없이 플러그가없음)

Power consumption: 1030W

Temperature range: 50 to 600ºC

・Station

Dimensions: 370(W)×150(H)×220(D)mm

Weight: 9kg

・ Station (Soldering)

Output voltage: AC 26V

Temperature range: 50 to 480ºC

Temperature stability: ±1ºC at idle temperature (When set to 200 to 480ºC)

・Station (Desoldering)

Output voltage: AC 24V

Vacuum generator: Vacuum pump, double cylinder type

Vacuum pressure: 80kPa (600mmHg)

Suction flow: 15L/min.

Temperature range: 330 to 450ºC

Temperature stability: ±5ºC at idle temperature

・Station (SMD Rework)

Power consumption: 30W

Air flow: 1 to 9 (5 to 115L/min.)

Temperature range: 50 to 600ºC

・ Soldering iron

Power consumption: 65W (26V)

Tip to ground resistance: <2Ω

Tip to ground potential: <2mV

Heating element: Ceramic heater

Standard tip: Shape-B (No.T18-B)

Cord length: 1.2m

Total length: 222mm (with B tip)

Weight: 52g (with B tip)

・Desoldering Gun

Power consumption: 140W (24V)

Nozzle to ground resistance: <2Ω

Nozzle to ground potential: <2mV

Heating element:; Composite heater

Standard nozzle: Φ1.0mm S type (No.N61-05)

Cord length: 1.2m

Total length: 168mm (with Φ1.0mm S type nozzle)

Weight: 190g (with Φ1.0mm S type nozzle)

・Handpiece (Hot air)

Power consumption: 670W

Total length: 250mm

Weight: 180g

Packing list: Station、Soldering iron (FX-8801), Desoldering gun (FR-4103), Iron holder for soldering gun (with cleaning wire), Iron holder for desoldering iron (with cleaning sponge, cleaning wire), Tool box (Cleaning pin for ø1.0 mm, Cleaning pin for heater, Cleaning drill for ø1.0 mm, Nozzle wrench, Filter [qty 2], Ceramic paper filter [qty 4]), Handpiece holder for hot air , Pad (Φ3mm, Φ5mm, Φ7.6mm: qty 2 each）, Heat resistant pad, Vacuum Pipe Control Knob (L with screw), Color band (qty 2), Power cord, Instruction manual

Optional Power: 

1030 W (100V), 1170W (110V), 1430W (220V), 1530W (230V), 1630 (240V)

Datasheet