For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0

Hanoi cites non-global virus contamination list

2025년 12월 01일 15시 28분 54초

On the morning of December 1, 2025, Hanoi continued to record hazardous air pollution levels, ranking among the most polluted cities in the world according to IQAir. Many downtown areas were blanketed in fine dust, affecting both public health and traffic conditions.

Current status of air quality in Hanoi

On the morning of December 1, the air pollution in Hanoi showed no signs of abating. The air quality index (AQI) remained at a very bad and hazardous level. Data from the air quality monitoring system showed that the capital is among the top 5 most polluted cities in the world. 

A thick layer of fine dust covered many inner-city districts. Most monitoring stations recorded an AQI level of 200 - 300, which is considered harmful to the health of all subjects, including people with good health.

By 9:30 a.m. the same day, the average AQI had slightly decreased to 205 compared to 225 on November 30, but there was still no sign of it leaving the top polluted cities.

On the air quality monitoring map, areas such as Thach That, Tay Ho, Phu Thuong Ward and Hai Ba Trung are all in the purple warning zone, indicating very bad air quality and a high risk to public health.

Source: Linh Thuong/VOV.VN

Traffic is difficult in the dusty fog

According to records at 8am, although the weather was sunny, many roads were still covered in fog. Visibility was significantly reduced, causing inconvenience to people, especially at the beginning of working hours. 

The drizzle and fog made it even more difficult to move. Many people had to wear thin raincoats or turn on their car lights to see better. 

The thick fog made many high-rise buildings almost hidden. On Nguyen Trai Street, there were many vehicles so most of them turned on their lights due to limited visibility.

Causes and recommendations

In recent days, Hanoi has experienced cold and dry weather. During the day, the temperature is around 19 to 25 degrees Celsius, and at night it drops to 12 to 14 degrees Celsius. The large temperature difference makes the air dry and forms a temperature inversion, making it difficult for fine dust to diffuse out of the urban area. 

On November 26, the Ministry of Agriculture and Environment requested that northern localities deploy response measures within 10 days due to forecasts of temperature inversion, windlessness and fog. The concentration of fine dust PM2.5 may increase, pushing the AQI above 150.

Some solutions are required to be implemented immediately:

- Check construction sites, require covering and cleaning wheels before leaving the site. Suspend construction sites that cause serious dust. Handle vehicles that drop materials

- Provide continuous air quality information and advise the elderly, children, and people with respiratory diseases to limit going outside. Wear masks when AQI is high

- Self-monitor indoor air quality

- Indoor air is also greatly affected on heavily polluted days. You should equip yourself with a personal air quality measuring device to know exactly the concentration of PM2.5 fine dust, CO2 and other toxic components that are affecting your office or home.

- Refer to the indoor air quality measuring devices distributed by EMIN such as Temtop M10, UNI T A25D, Elitech M10, M2000C. These devices help accurately monitor PM2.5 or CO2 concentrations so you can proactively turn on the air purifier or open the ventilation when needed.

- Clean and filter the air: Close windows and doors on days of high pollution. Clean your home regularly and use an air purifier with a HEPA filter to remove fine dust and airborne particles from your living space.

Read more: Air pollution in the office? What should be done first?

In the context of high pollution levels, Hanoi residents need to regularly monitor air quality and proactively protect their health with appropriate measures. This situation may last due to weather factors, so staying informed and following recommendations from authorities will help minimize risks in daily life.

관련 뉴스

Formula for Converting TOC to COD for Wastewater
2026년 10월 14일 11시 27분 30초

This article addresses various questions in turn, covering whether conversion is permitted, how to establish the K-factor, when the factor ceases to be valid, and which equipment is suitable

Guide to Selecting Case and Sensor Materials for Pressure Gauges in Corrosive Chemical Environments
2026년 10월 13일 11시 14분 57초

In chemical processing plants, wastewater treatment facilities, oil & gas operations, and food production, selecting the wrong material for a pressure gauge often leads to severe consequences: Bourdon tube failure, toxic chemical leaks, equipment breakdown, and serious occupational safety hazards. This article provides practical technical criteria for selecting the correct case and sensor materials when measuring pressure in corrosive environments.

Measuring COD and TOC in Electroplating Wastewater Using a Benchtop Analyzer? What Sources of Error Should Be Avoided?
2026년 10월 13일 10시 55분 11초

The current situation regarding electroplating wastewater analysis presents challenges: the wastewater contains acids, alkalis, and heavy metals (such as Cr, Ni, and Cu), alongside persistent cyclic organic compounds derived from brightening agents, anti-misting additives, and degreasing solvents. This complex composition causes significant fluctuations in COD levels depending on the specific process stage and production shift. Sending samples to external laboratories results in a delay of several days—by which time the biological treatment tanks or coagulation systems may have already been operating improperly for too long. Utilizing a benchtop COD analyzer on-site reduces this turnaround time to just a few hours, provided the user fully understands the specific sources of error associated with electroplating wastewater

How to Rapidly Reduce COD in Domestic Wastewater?
2026년 10월 13일 10시 25분 11초

Wastewater treatment plants serving apartment complexes, buildings, and residential areas sometimes experience effluent COD levels approaching regulatory limits, particularly following sudden load surges or shortly before scheduled compliance sampling. QCVN 14:2025/BTNMT, applicable to domestic wastewater from September 1, 2025, sets COD limits based on discharge volume and the receiving water body, while allowing dischargers to choose between TOC and COD parameters

Challenges of Pressure Gauges in Hydrogen Environments
2026년 10월 12일 16시 47분 15초

The global energy transition trend is driving industrial plants, chemical facilities, and renewable energy sites to integrate hydrogen as a strategic fuel source to achieve decarbonization goals. However, practical experience shows that traditional mechanical pressure gauges rapidly degrade in service life and experience dangerous failures when in direct contact with hydrogen environments.

혜택 소식 받아보기

대량 할인, 도매 가격 업데이트 및 신제품 소식을 이메일로 받아보세요.

구독하면 당사의 서비스 이용약관 및 개인정보 처리방침에 동의하는 것으로 간주됩니다.

빠른 지원

인증된 전문가에게 직접 연결