HILO-test IPG 506 프론트-초프드-웨이브 제너레이터 (640 V; 0.5 kΩ - 3 GΩ; 5 kV ± 10%)

Mainframe

Microprocessor: Controlled touch panel 7”, capacitive

Optical Ethernet Interface: For remote control of the generator (Optional)

Interface for saving reports: USB

External Trigger: Input/Output Switch/10V

Connector: For external safety interlock loop 24 V=

External warning lamps: Red and green, 24 V=, 40 mA

Mains power: 90V – 264V / 50/60 Hz

Dimensions of desk top case (W * H * D): 450*180*500 mm³

Weight: 18 kg

Generator section

Output terminals:

Switch-unit: For successive testing of 8 devices

8HV: x 4 mm Ø connector

1GND: x 4 mm connector

DC spark-over voltage:

Test voltage: Controlled by a 12-bit DAC 640 V

Rate of rise: 100 V/sec

Measurement accuracy: 12-bit

Impulse spark-over voltage:

Test voltage: Amplitude of the open loop impulse voltage 5 kV ± 10%

Rate of rise (selectable): 100/200/500 V/µs, 1000/2000/5000 V/µs

Repetition time (selectable): 5 - 1000 sec

Number of pulses (selectable): 1 - 1000

Polarity of output voltage (selectable): Positive/Negative

Max. stored energy: 6 Joule

Measurement of spark-over voltage: 500 - 1500 V +5%/-15%

Monitor output: For impulse output voltage ratio 1000:1 ± 3%

Measurement of insulation resistance:

Measuring range: 0.5 kΩ - 3 GΩ

Test voltage (selectable): 50 V / 100 V

Datasheet