HILO-test PG 10-1000 고전압 펄스 발생기 (1.2 / 50 µs: 0.5 - 10 kV; 10 / 700 µs: 0.5 - 10 kV)

Be designed for dielectric testing of components and systems as well as testing of the electromagnetic compatibility of electronic systems and devices acc. to CCITT K17/K20/K22, ITU-T/K44, IEC 61000-4-5, VDE 0847.

Mainframe

Microprocessor controlled touch panel: 5”, 800X480, 24 bit

Optical Ethernet Interface for remote control of the generator: optional

Interface for saving reports: USB

External Trigger input: switch

External Trigger output: 10 V at 1 kΩ

Connector for external safety interlock loop: 24 V=

External red and green warning lamps: 230 V, 60W

Mains power: 230 V, 50/60 Hz

Dimensions of desk top case, 6/7 HE W * H * D: 453*320*520 mm³

Weight: 35 kg

High-voltage pulse generator

Impulse output voltage, adjustable: 0.2 - 10 kV ± 5%

Polarity of output voltage/current, selectable: pos/neg/alt

Charging time: < 20 sec

Current limiting resistors: 0 Ω / 25 Ω / 25 Ω

Pulse forming networks: selectable

a) Impulse voltage 1.2/50µs acc. to CCITT / ITU-T K22; CCITT / ITU-T K21/K22: PFN 1.2/50

Energy storage capacitor: 1.0 µF / 12 kV

Discharging resistor: 76 Ω

Series resistor: 13 Ω

Load capacitor: 0.03 µF

Wave form: front time/tail time: 1.2 / 50 µs ± 30%/±20%

b) Impulse voltage 10/700µs acc. to CCITT / ITU-T K17/K20, IEC 1000-4-5: PFN 10/700

Energy storage capacitor: 20 µF / 14.6 kV

Discharging resistor / Series resistor: 50 Ω / 15 Ω

Load capacitance: 0.2 µF

Wave form: front time/tail time: 10 / 700 µs ± 20%

Direct pulse voltage output on the rear panel: coaxial for connection of external coupling devices

Monitor output for pulse output voltage: ratio = 1000 : 1 ± 5%

Datasheet