HILO-test PG 10-200 HV-펄스 제너레이터 (1.2 / 50 µs: 0.5 – 10 kV; 0 nF – 183 nF)

Mainframe

Microprocessor: Controlled touch panel 7”, capacitive

Optical Ethernet Interface: For remote control of the generator (optional)

Interface for saving reports: USB

External Trigger: Input/Output Switch / 10 V

Connector: For external safety interlock loop 24 V= and external red and green warning lamps acc. to VDE 0104, 24 V=, 40 mA

Mains power: 230V, 50/60 Hz

Dimensions (desk top case, W * H * D): 450 * 330 * 500 mm³

Weight: 22 kg

High-Voltage Pulse Generator (acc. to IEC 61000-4-4:2012)

Impulse output voltage (adjustable ± 5%): 0.5 - 10 kV

Waveform of impulse output voltage:

Risetime: 1.2 µs ± 30%

Backtime: 50 µs ± 20%

Polarity (selectable): Positive/Negative

Maximum stored energy (Cs): 250 J

Charging time (for max. charging voltage): Approx. 10 sec

Interior load capacitance (Cp): 10 nF ± 10%

Pulse forming networks (to test solar modules): Cp = 0 - 183 nF

Spark-over detection: PASS / FAIL

Impulse current output: On the generator’s rear panel, HV female connector

Impulse high voltage dividers: Built-in, to observe the impulse wave shape, ratio 1000:1 ± 2%

Accessories: Mains cable, key, HV-connection cable, operation instructions

Datasheet