빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Mainframe
Microprocessor controlled touch panel: 7”, capacitive
Optical Ethernet Interface for remote control of the generator: optional
Interface for saving reports: USB
External trigger input / output: Switch/ 10 V
Connector for external safety interlock loop and external red and green warning lamps (acc. to VDE 0104): 24 V=, 40 mA
Mains power: 230 V, 50/60 Hz
Dimensions (19"-cabinet): ca. 553 * 600 * 600 mm³
Weight: 65 kg
Pulse generator section
The surge current generator PG 10-25000 generates impulse currents with waveform 10/350 µs and is designed for testing two-gap over-voltage protectors. The Generator has two outputs, which can be connected together. Pulse current output amplitude is controlled by preset charging voltage and can be set to (1 - 10) kA or 2 * (0.5-5) kA respectively.
Peak value of charging voltage, adjustable: 0.2 - 10,000 V, ± 2%
Energy storage capacitor: 25000 Ws
Charging time for max. charging voltage: 300 sec
Waveform of impulse output current: 10 / 350 µs ± 20 %
Impulse output current, adjustable via charging voltage: 1.0 – 10.0 A ± 5 %
Output pulse polarity, switchable: POS/NEG/ALT
Current viewing resistor, built-in: 0.5 Ω, 2 MHz
Dimensions (19"-cabinet W * H * D): ca. 1200 * 2000 * 800 mm³
Weight: 425 kg
