HINOTEK S50-H 블루투스 전도도 테스터 (100.0-2000µS/cm, 20.00, 200.0mS/cm)

Conductivity:

   Range: 100.0-2000µS/cm, 20.00, 200.0mS/cm

   Resolution:  0.01, 0.1, 1

   Accuracy: ±0.5% F.S.

   Calibration Points: 1 to 3 points

   Calibration Solutions:  1413µS, 12.88mS, 111.8mS/cm

   Temperature Coefficient: Linear (0.0 to 10.0%/°C), non-linear, USP, EP

   Pure water compensation: yes

   Reference Temperature: 20/25°C

   Temperature Compensation: 0 to 100°C/32 to 212°F, automatic

   Cell Constant: K= 10

TDS:

   Range: 0.00 to 100.0, 1000mg/L, 10.00, 200.0g/L

   Resolution: 0.01, 0.1, 1

   Accuracy: ±1% F.S.

   TDS Factor: 0.01 to 1.00(default 0.5)

Salinity:

   Range: 0.00 to 42.00psu, 0.00 to 80.00ppt, 0.00-8.00%

   Resolution: 0.01

   Accuracy: ±1% F.S.

Resistivity:

   Range: 0.00 to 1.00MΩ

   Resolution: 0.01, 0.1, 1

   Accuracy: ±1% F.S.

Conductivity ash:

   Range: 1-100%

   Resolution: 0.01, 0.1, 1

   Accuracy: ±1% F.S.

   Measurement modes: refined sugar or raw sugar

General parameters:

Stability conditions: Fast, standard, high precision

   Measurement mode: Continuous or automatic end point lock

   Timed interval reading: 10, 30, 60, 300 seconds or off

   Calibration due reminder: 1 to 99 days or closed

   Data transmission: Send to memory or printer

   Connectivity: Bluetooth 4.0 or higher

   Power type: 2x1.2V lithium battery or 2 AAA batteries

Ordering information: Tester, conductivity standard solutions and carry case

Datasheet

Manual