For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0

Webinar: Spectrum View - A New Approach to Frequency Domain Analysis on Oscilloscopes

2020년 06월 02일 08시 48분 34초

Spectrum View is a new way of performing spectrum analysis on an oscilloscope. The ADC in the oscilloscope sends high-speed digitized data down two paths

Spectrum View is a new way of performing spectrum analysis on an oscilloscope. The ADC in the oscilloscope sends high-speed digitized data down two paths. One path leads to hardware decimators which determine the rate at which time domain samples are stored. The second path leads to digital down-converters also implemented in hardware. This approach enables independent control of the time domain and frequency domain acquisitions, allowing optimization of both waveform and spectrum views of a given signal. It also makes much more efficient use of the long but finite record length available in these instruments.


Date: June 10, 2020

Time: 8:00 am (TH time), 9:00 am (SG time)


Insert alt text here


In this webinar, we will show and explain how Spectrum View operates and how it differs from traditional oscilloscope FFT functions. Join us today!




관련 뉴스

SiC/GaN Semiconductor Material Trends: From Materials Research to In-Depth Failure Analysis
2026년 10월 24일 09시 59분 14초

As we enter the 2026–2030 period, wide-bandgap (WBG) semiconductor materials such as Silicon Carbide (SiC) and Gallium Nitride (GaN) are transforming the power electronics, electric vehicle (EV/HEV), renewable energy, and AI data center industries. The shift from traditional silicon to SiC and GaN enables higher power density, smaller passive components, and improved overall system energy efficiency.

Chauvin Arnoux C.A 6117 Multifunction Electrical Installation Tester
2026년 10월 23일 15시 26분 05초

An all-in-one testing solution that complies with the international standard IEC 60364-6. It features a 5.7-inch color graphical display, supports Type B RCD testing, includes memory for 1,000 measurements, and is equipped with a Lithium-ion battery providing 30 hours of continuous operation

Plastic Products with Color Streaks: How to Adjust Back Pressure and Screw Speed? How Should Color Be Measured to Verify Proper Adjustment?
2026년 10월 21일 15시 30분 17초

In the middle of the night shift, a batch of light-gray plastic emerged, streaked with debris. The machine operator took one look and did what came most naturally: he cranked up the screw speed and increased the back pressure to ensure the orange-colored pellets melted completely. By morning, the color was indeed more uniform. A few weeks later, the customer returned the entire shipment the products had become brittle, cracking at the slightest impact, and the color varied from one delivery to the next, failing to match the approved standard

혜택 소식 받아보기

대량 할인, 도매 가격 업데이트 및 신제품 소식을 이메일로 받아보세요.

구독하면 당사의 서비스 이용약관 및 개인정보 처리방침에 동의하는 것으로 간주됩니다.

빠른 지원

인증된 전문가에게 직접 연결