빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
-Measurement parameters: DC resistance
-No. of Channel: Each card has 8 channels.
-Accuracy: 0.05%
-Measurement range: 10μΩ～300KΩ
-Signal Source: current:<100 mA
-Measuring speed: 3 meas/sec., 10 meas/sec., 30 meas/sec.
-Maximum display value: 30000
-Calibration: Short-circuit reset for all ranges
-Comparator: the comparator can be set separately in each channel
-Trigger mode: auto trigger/internal/remote trigger
-Interface: RS-232C(including SCPIT command),handler (Optional PLC interface)
-Power supply:
+Voltage:90VAC-250VAC;
+Frequency: 47Hz～400Hz;
+Power: max 15VA
-Dimension : 263 mm (L)x249mm (W)x102mm (D)
-Weight: 2.5kg
| The CHT3541X is a band new design multi-channel resistance meter with high precision, wide measurement range and compact plug-in card design. The customer can configure a capture card or alarm card according to the different meets. Each test card can scan and test 8 channels resistance. The CHT3541X adopts high performance ARM micro processor control design. 48 channels of resistance can be indicated simultaneously in the true-color 4.3 inches LCD display and each channel can set the comparator separately. The CHT3541X provides resistance range of 10μΩ～300KΩ,giving a maximum display value of 30000 counts. Its temperature compensation function can adapt different testing requirements. The RS232C and HANDLER interfaces can be used to output GD/NG signal, to improve automatic measurement ability on production line. |
|
Model |
CHT3541X |
|
Measurement parameters |
DC resistance |
|
No. of Channel |
Each card has 8 channels. |
|
Measurement range |
10μΩ～300KΩ |
|
Signal Source |
current:<100 mA |
|
Accuracy |
0.05% |
|
Measuring speed |
3 meas/sec., 10 meas/sec., 30 meas/sec. |
|
Result display |
available of two fonts display; |
|
Maximum display value |
30,000 |
|
Calibration |
Short-circuit reset for all ranges |
|
Comparator |
the comparator can be set separately in each channel |
|
Trigger mode |
auto trigger/internal/remote trigger |
|
Interface |
RS-232C(including SCPIT command),handler (Optional PLC interface) |
|
Trigger and alarm signal |
Optional alarm card |
|
Test terminal |
Four-terminal(including 2 detecting-ends and 2 driver-end ) |
|
Power supply |
Voltage:90VAC～250VAC; Frequency: 47Hz～400Hz;Power: max 15VA |
|
Dimension & weight |
263 mm (L)x249mm (W)x102mm (D); Weight: 2.5kg |
|
Accessories |
CHT9340 kelvin test wire |
|
Others |
LCD display |
