For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0

How to hang feng shui paintings during Tet beautifully and straight without being visually unbalanced?

2026년 02월 13일 13시 39분 27초

At the end of the year, after the house has been cleaned, many families begin to think about replacing the paintings in their living room. Some choose gilded paintings of horses galloping to success to bring good luck at the beginning of the year. Others prefer traditional bronze paintings for their luxurious and cozy feel. Kindergartens often choose modern canvas paintings hung in sets for a harmonious look.

Measured with a tape measure, marked with a pencil, stepped back a few steps to observe, and then noticed it was slightly askew. Only after drilling and hanging it up did I realize it was a little too light. And at the beginning of the year, who would want a feng shui painting to be uneven.

The more valuable a painting depicting horses galloping to success, the more important it is to hang it correctly

Feng Shui horse paintings, especially those gilded or large-sized, are often quite heavy and valuable. Drilling in the wrong position not only damages the wall but also makes subsequent corrections more time-consuming and aesthetically unappealing.

Instead of estimating by eye, many families now use laser leveling devices to establish a horizontal line as a guide. Simply set the device in place, turn it on, and a light line will appear horizontally across the wall. The top edge of the painting is aligned with this line, resulting in a balanced appearance.

When you hang canvas paintings as a set, even small discrepancies become clearly visible

With sets of three or five paintings, uniformity between the frames is far more important than with single paintings. Just one frame being a few millimeters higher or lower will immediately make the overall look unbalanced.

Previously, many people had to measure every distance, mark numerous points on the wall, and then wipe them away for fear of ruining the aesthetics. With a laser level, only a fixed horizontal line is needed as a reference. The frames are placed at the same height, making the overall look much neater.

Tasks that used to be time-consuming become easier, especially when everyone is busy at the end of the year.

Reference: Quickly address wall moisture before hanging up pictures for Tet

Bronze paintings and large-scale artworks require consideration of both placement and focal point

For bronze or large-sized paintings, in addition to hanging them straight, they must be placed in the correct central position to harmonize with the sofa, coffee table, or the living room space.

If hung off-center, the entire room will feel unbalanced. These are small details, but they affect the overall feeling when entering the house.

Laser leveling devices like the Bosch GLL 3 ​​80, Leica Lino L2, or Stanley STHT 77516 8 are commonly used in interior decoration because of their simple operation and ease of use in home spaces. Simply turn on the device, follow the light path, and proceed step by step to achieve a neat and even wall finish.

Hanging paintings during Tet is also a way to show care and attention to the new year.

Vietnamese people always value neatness and order at the beginning of the year. A neatly hung painting in the center of the living room is not only aesthetically pleasing but also creates a sense of stability and tidiness when welcoming guests to offer New Year greetings.

Previously, hanging paintings relied heavily on intuition and estimation. But with the help of equipment, everything has become much simpler. Doing it right once ensures peace of mind throughout the year.

Therefore, hanging paintings during Tet is not just about decoration. It's also a way for each family to express their wishes for a more prosperous, successful, and stable new year through every small detail of their home.

관련 뉴스

What is the difference between oil-lubricated vacuum pumps and oil-free diaphragm pumps?
2026년 07월 17일 10시 05분 46초

While both generate a vacuum, oil-lubricated pumps and oil-free diaphragm pumps differ significantly in their operating principles, advantages, and applications. Oil-lubricated pumps are typically chosen when a system requires a deep vacuum and strong suction power, whereas diaphragm pumps are preferred for laboratories, chemical processes, and environments where oil vapors must be avoided

Why is the vacuum pump making a loud noise? 6 common causes and how to fix them immediately
2026년 07월 17일 09시 36분 33초

A vacuum pump making louder-than-normal noise often points to issues with the rotating assembly, vanes, pump oil, filters, or the intake piping. The specific sound produced helps narrow down the cause: a sustained whistling sound differs from the rattling inside the pump chamber or a heavy, grinding noise accompanied by strong vibration

Which Vacuum Pump Should You Choose for a Microbiology Lab to Avoid Affecting Samples?
2026년 07월 15일 14시 45분 07초

Vacuum pumps are utilized in a wide range of microbiology laboratory procedures, from membrane filtration and the aspiration of supernatants following centrifugation to sample concentration and the support of negative-pressure systems. Selecting the appropriate pump not only ensures more stable operational processes but also minimizes the risk of sample contamination, reduces maintenance costs, and extends the equipment's lifespan

QCVN 25:2025/BKHCN Takes Effect: Do Businesses Need to Prepare Electrical Safety Testing Equipment?
2026년 07월 15일 09시 15분 04초

Electrical safety is consistently one of the primary criteria evaluated before electrical or electronic equipment—or industrial components—are released to the market. A product may operate reliably yet still fail to meet requirements if its insulation lacks sufficient durability, its grounding resistance exceeds permissible limits, or leakage current occurs during operation.

혜택 소식 받아보기

대량 할인, 도매 가격 업데이트 및 신제품 소식을 이메일로 받아보세요.

구독하면 당사의 서비스 이용약관개인정보 처리방침에 동의하는 것으로 간주됩니다.

빠른 지원

인증된 전문가에게 직접 연결