For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0

How Do You Use a Jasic Plasma Cutter Safely ?

2026년 11월 16일 08시 48분 44초

A Jasic plasma cutter uses a plasma arc and compressed air to cut conductive metals. Connect the torch, work clamp, pilot lead, and control plug; set up air and select cutting current and 2T/4T mode before cutting.

To use a Jasic plasma cutter safely, connect the cutting components in the correct order, connect and adjust the air supply, then select the cutting current and the appropriate 2T/4T mode before starting work. The procedure described here refers specifically to the Jasic CUT100 L201 configuration in the available source material.

Jasic plasma cutting uses an arc together with compressed-air pressure to create a plasma stream that removes molten material from the cut. It is intended for conductive metals, including steel, stainless steel, and aluminum.

Summary: Connect the work clamp, torch, pilot lead, and control plug before cutting. Set up the air supply and confirm the air indicator is off. Choose cutting current and 2T/4T mode for the material. Use protective equipment and keep the work area clear of flammables.
Jasic plasma cutter used for metal cutting
Jasic plasma cutting equipment for metalworking.

What is a Jasic plasma cutter and how does it cut metal?

A Jasic plasma cutter is a machine that cuts conductive metal with a plasma arc. Compressed-air pressure works with the arc to form a plasma stream, which blows away molten material and creates the cut line.

The source material identifies steel, stainless steel, aluminum, and other conductive materials as applicable workpieces. Its listed applications include truck-body and container work, shipbuilding, equipment manufacturing, steel-structure fabrication, medical equipment, and chemical-related equipment.

Which controls and connections should be checked on the Jasic CUT100 L201?

Before operation, identify the controls and connection points so that the torch, work clamp, air supply, and settings can be checked systematically. The CUT100 L201 information lists a current display, a 2T/4T mode switch, overload and overheat indicators, a current-adjustment knob, and torch and work-clamp sockets on the front.

AreaListed components or functions
Front panelCurrent display, 2T/4T switch, overload/overheat indicators, current-adjustment knob, torch socket, work-clamp socket
Rear areaCooling fan, power cable, air-filter gauge
Machine functions stated for CUT100 L201Automatic shutdown for overcurrent or overheating; automatic voltage compensation when input voltage changes

These features do not replace an operator check. Confirm that cables and air connections are secure before use, and observe any status indicators during operation.

How do you connect a Jasic CUT100 L201 before cutting?

Connect the work clamp and cutting torch first, followed by the red pilot lead and then the control plug. This is the connection sequence provided for the Jasic CUT100 L201.

Connecting cables on a Jasic CUT100 L201 plasma cutter
Connect the cutting components before setting up air and cutting parameters.

After the electrical and torch-related connections are in place, connect the air supply and adjust its pressure. The source indicates that the air indicator should be off after this step.

What settings should be selected before starting a plasma cut?

Set the cutting current and select either 2T or 4T mode according to the material before beginning the cut. The available material does not specify current values or material-by-material settings, so those values should not be assumed.

Connecting and adjusting air for a Jasic plasma cutter
Connect the air supply and adjust it before cutting.

Once the cable connections, air connection, and settings are complete, cutting can begin. Keep hands, face protection, and other body parts at a safe distance from the cutting area while the machine is operating.

What personal protective equipment is needed for plasma cutting?

Use eye, face, hand, and body protection because plasma cutting involves arc radiation, bright light, sparks, heat, and dust. The source specifically calls for arc-rated protective eyewear, a protective face mask, insulating gloves, and protective clothing.

  • Wear protective eyewear to help shield the eyes from ultraviolet radiation and intense light.
  • Use a face mask to protect the face and eyes from radiation, sparks, and dust.
  • Wear insulating gloves and protective clothing to reduce exposure to sparks and heat.

How should the work area and machine be handled after cutting?

Keep the work area ventilated and free of flammable materials, gasoline, oil, and other ignition or explosion hazards. Do not touch the plasma arc directly while the machine is operating, as it can cause burns.

Safety precautions for operating a Jasic plasma cutter
Use protective equipment and prepare a clear, ventilated cutting area.
Note: After use, turn off the plasma cutter and check the electrical and air connections before storing the equipment.

Maintain a safe separation between your hands, face protection, and the cutting zone throughout operation. This final check helps ensure the plasma cutter is shut down and its connections are reviewed before storage.

관련 뉴스

SMEMA standard for PCB conveyors
2026년 11월 16일 14시 00분 39초

SMEMA was developed to address this specific point; consequently, conveyors, loaders, and unloaders all include an SMEMA port in their technical specifications

Reduce scratches and drops of PCB boards during transfer between stages in an SMT production line
2026년 11월 16일 10시 42분 38초

In a well-functioning SMT line, when QC detects defects at the end of the process, the immediate assumption is often that the issue lies with the solder paste printer or the component placement machine. However, upon closer investigation, there are certain types of defects that cannot be attributed to any single specific stage. Read the article below to learn more!

Homes on busy streets: How to measure fine particulate matter and exhaust fumes entering your living room
2026년 11월 16일 09시 42분 31초

Living in a house facing a main road is particularly frustrating: you might wipe the tables until they’re spotless in the morning, only to find them covered in a layer of dust by the afternoon. Even with the doors tightly shut and the curtains drawn, the house still feels stuffy by evening—permeated by the faint, lingering presence of vehicle exhaust. While regular dust can be swept away, fine particulate matter the kind you can’t even see silently seeps in through the gaps around your doors and windows. So, before you rush to spend money on an air purifier or weather-stripping, take a moment to check the current air quality inside your home and identify exactly where the pollutants are entering

Can Laser Welding Machines Weld Aluminum Effectively ?
2026년 11월 16일 08시 54분 12초

Laser welding is presented as an aluminum-joining method that concentrates heat at the weld point, helping limit distortion. Suitable settings depend on material thickness, filler wire use, and trial weld results.

What Gas Does a Plasma Cutter Use and How Do You Choose It?
2026년 11월 16일 08시 53분 20초

Plasma cutting gas selection depends on the material, thickness, cut quality target, and operating cost. Clean air is economical, oxygen suits carbon steel, and nitrogen or argon-hydrogen supports stainless steel and aluminum applications.

혜택 소식 받아보기

대량 할인, 도매 가격 업데이트 및 신제품 소식을 이메일로 받아보세요.

구독하면 당사의 서비스 이용약관 및 개인정보 처리방침에 동의하는 것으로 간주됩니다.

빠른 지원

인증된 전문가에게 직접 연결