ICP DAS I-7530-G CR Intelligent RS-232 to CAN Converter

CAN Interface

Controller: Microprocessor inside with 20 MHz

Channel number: 1

Connector: 9-pin male D-Sub (CAN_L, CAN_H, N/A for others)

Baud Rate (bps): 10k, 20k, 50k, 125k, 250k, 500k, 800k, 1 Mbps

Transmission Distance (m): Depends on baud rate (e.g., max. 1000 m at 50 kbps)

Isolation: 3000 VDC for DC-to-DC, 2500 Vrms for photo-coupler

Terminal Resistor: Selectable 120 Ω terminal resistor by jumper

Specification: ISO-11898-2, CAN 2.0A and CAN 2.0B

Receive Buffer: 1000 data frames

UART Interface

COM: RS-232

COM Connector: 9-pin female D-Sub (TxD, RxD, GND, N/A for others)

Baud Rate (bps): 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

Data Bit: 5, 6, 7, 8

Stop Bit: 1, 2

Parity: None, Even, Odd

Receive Buffer: 900 data frames

LED

Round LED

ON LED: Power and Data Flow

ERR LED: Error

Power

Protection: Reverse polarity protection, over-voltage brown-out protection

Power Consumption: 1 W

Mechanism

Installation: DIN-Rail

Dimensions: 72 mm × 118 mm × 33 mm (W × L × H)

Environment

Operating Temperature: -25 ~ 75 ℃

Storage Temperature: -30 ~ 80 ℃

Humidity: 10 ~ 90% RH, non-condensing

Datasheet