Instructions for adjusting the thermometer from F to C for beginners

Converting a thermometer from Fahrenheit to Celsius is a common problem for those new to using the device. Electronic thermometers are now popular in most families, especially those with young children. However, some people may have difficulty reading the measurement results because these devices often have two measurement modes: Celsius and Fahrenheit. In our country, Celsius is the more popular unit of temperature measurement. Therefore, resetting the thermometer to display results in degrees Celsius will make monitoring the temperature easier and more convenient.

Normally, when you first buy an electronic thermometer, they are usually pre-installed in Celsius mode. However, for some reason, your device may have switched to Fahrenheit mode. No No need to worry, because this can be completely fixed. Below, I will guide you how to convert from Fahrenheit to Celsius in a detailed and easy-to-understand way.

Formula to convert degrees Celsius to Fahrenheit

First, to understand how to convert degrees Celsius to degrees Fahrenheit and vice versa, let's learn the conversion formula. The formula to convert from degrees Fahrenheit to degrees Celsius is:

C = (oF – 32)/1.8.

When you want to convert from Fahrenheit to Celsius, you just need to substitute the Fahrenheit value into the above formula and calculate. For example, to convert 37 degrees Fahrenheit to Celsius, you would calculate as follows:

37 degrees F = (37 – 32)/1.8 = 2.78 degrees C.

Conversely, if you want to convert from Celsius to Fahrenheit, the formula will be:

oF = (oC x 1.8) + 32

For example, to know how many degrees Fahrenheit is 37 degrees Celsius, do the following:

37 degrees Celsius=(37×1.8)+32=98.6 degrees Fahrenheit

With just these two simple formulas, you can easily convert between two temperature measurement units quickly and accurately.

Full steps to adjust temperature from F to C

On the market today, there are many types of electronic thermometers from brands such as OMRON, Microlife, LaiCa, Polygreen, Beurer,... Each brand will have different usage, but the conversion process between degrees Celsius and Fahrenheit usually has the following basic steps:

1. Turn off the device: Make sure the device is completely turned off.

2. Press and hold the start button: When the machine is off, press and hold the start button (or START/MODE button) for about 3-5 seconds. The screen will display degrees Celsius and Fahrenheit, displaying the current unit of measurement.

3. Select the desired unit of measurement: Use the adjustment button to select the unit of measurement (Celsius or Fahrenheit) you want to display.

4. Confirm new measurement unit: Press the start button again to save and switch measurement mode.

5. Wait for the device to be ready: After installation, wait about 3-5 seconds for the device to automatically switch to ready measurement mode.

How to adjust Omron TH-839S infrared ear thermometer

1. Press and hold the measurement key: Switch the thermometer to off mode by pressing and holding the measurement key.

2. Hold the power key: After the device turns off, hold the power key (power off), then press the “ON/MEM” key.

3. Convert measurement units: After completing the above two steps, continue to hold down the measurement key for a few seconds when the machine turns on. The °C symbol will change to °F or vice versa.

How to adjust Omron MC-720 infrared forehead thermometer

To adjust the Omron MC-720 infrared forehead thermometer, do the following:

1. Press and hold the START key.

2. Press and hold the ON/MEM key: Simultaneously press and hold the ON/MEM key until °C is displayed on the screen with two beeps.

Conclude

Hopefully, with the above information and detailed instructions, you can easily adjust the thermometer from degrees Fahrenheit to degrees Celsius. Refer to the product at: Infrared temperature meter

관련 뉴스

2026년 07월 22일 14시 45분 25초

Which products are tested using a -40°C to +150°C thermal shock chamber?

Automotive circuit boards, sensors, modules, and plastic components can all experience issues after repeated transitions between cold and hot environments. A thermal shock chamber operating from -40°C to +150°C enables the replication of these temperature fluctuations under controlled testing conditions.

2026년 07월 22일 10시 40분 49초

Does thermal shock cause damage to electronic components?

An electronic component may operate stably under constant temperature conditions yet fail after repeated rapid transitions between hot and cold. The issue typically stems not from a specific temperature level, but rather from the rate of temperature change and the number of hot-cold cycles

2026년 07월 21일 14시 54분 01초

The rigorous standards behind a multi-million-dollar MRI suite

An MRI system may be correctly installed and fully connected to the power supply, yet still encounter issues if the surrounding environment fails to meet technical specifications. Electromagnetic interference, RF shielding, power quality, grounding, temperature, humidity, and particulate levels are all factors that may require assessment, depending on the facility's design and the manufacturer's requirements.

2026년 07월 21일 10시 30분 38초

Sinusoidal and Random Vibration: A Test Setup Guide for Industrial Engineers

During the operation of industrial machinery or the transportation of goods, persistent mechanical vibrations inevitably occur; these are a primary cause of material fatigue, loosened connections, and cracking in printed circuit boards (PCBs). To ensure product integrity before delivery to customers, R&D and QA/QC engineers must simulate these dynamic forces using vibration test systems.

2026년 07월 20일 13시 55분 40초

Capacities of laboratory centrifuge tubes

Tubes with capacities of 0.2 ml, 1.5 ml, 15 ml, or 50 ml are commonly found in laboratories, yet each type is associated with specific sample categories and equipment configurations. DNA and RNA samples typically require small-volume microtubes; blood and cell samples often utilize 5 ml or 15 ml tubes; while large-volume processing workflows may require tubes of 50 ml, 100 ml, or greater capacity