JPT LTS-TKF-UV-I 레이저 트리머 (1Ω-1MΩ)

Substrate specification: 01005 and above

Trimming range: 1Ω-1MΩ

Trimming accuracy: 0.1% and 1%

Kerf width: 8-15μm

Laser source: JPT-UV

Measurement channels: 192/240

Laser Trimmer is mainly used to scan and trim resistors with the short-pulse laser. The laser can “cut out” kerfs of given depth by gasifying the resistive film on the ceramic substrate, altering the length and the cross-sectional area of the resistor and this subsequently changes its resistance value.