JPT LTS-ULO-IR-I 레이저 트리머 (0.1mΩ-1Ω)

Substrate specification: 0201 and above

Trimming range: 0.1mΩ-1Ω

Trimming accuracy: 1% and 5%

Kerf width: 20-40μm

Laser source: JPT-IR

Measurement channels: 96/160

Laser Trimmer is mainly used to scan and trim resistors with the short-pulse laser. The laser can “cut out” kerfs of given depth by gasifying the resistive film on the ceramic substrate, altering the length and the cross-sectional area of the resistor and this subsequently changes its resistance value.