JPT YDFLP-CL-200-5-A Mopa Fiber Laser (>200W/ 5mJ/ 1-4000kHz)

Application

Laser paint stripping

Metal surface processing, Peeling coating

Laser derusting

Pre-welding treatment

Sheet metal welding

Hand-held marking

Specification

M²: <4

Armored Cable Length (m): 5

Nominal Average Output Power (W): >200

Maximum Pulse Energy (mJ): 5

Pulse Repetition Rate Range (kHz): 1 ~ 4000

Pulse Duration (ns): 2 ~ 500

Output Power Stability (%): <5

Cooling Method: Air Cooled

Supply DC Voltage (VDC) (V): 48

Maximum Power Consumption (W): <800

Environmental Supply Current (A): >16

Central Emission Wavelength (nm): 1064

Emission Bandwidth @3dB (nm): <15

Polarization Orientation: Random

Anti-high Reflection: Yes

Output Beam Diameter (mm): 6.5±1.0

Output Power Tuning Range (%): 0 ~ 100

Operation Temperature (℃): 0 ~  40

Storage Temperature (℃): -10 ~ 60

Net Weight: 30 kg

Size(L×W×H): 523 x 430 x 133 mm

JPT CL series laser make use of master oscillator power amplifier (MOPA) configuration,and show excellent laser performance as well as high level of temporal pulse shaping controllability. As compared to the Q-switching technology, the pulse repetition frequency (PRF) and pulse width can be controlled independently in MOPA configuration, through adjusting different combination of the above parameters, the peak power of laser can be well maintained. And enable JPT laser suitable for more material processing which Q-switch limited. CL series laser designed with ultra-light output connector, and still be anti-high reflection, definitely be the best option for handheld or robot cleaning system.