KEISOKU GIKEN QA-30K-T4-4 High-Capacity Programmable AC Power Source (30kVA / 310VL-N / 100A / 3P4W / 360-440Hz)

AC output (AC RMS value)

Phase/number of wires: three phase 4 wire

Rating:

Rated voltage: 155 Vrms / 310 Vrms

Rated current: 100 Arms / 50 Arms

Rated power: 30 kVA

AC voltage:

Output phase voltage setting range: 0 to 155 V / 0 to 310 V / Auto Range

Output line voltage setting range: 0 to 269 V / 0 to 537 V / Auto Range

AC maximum current:

0 to 155 V: 100 A @ 100 V

0 to 310 V: 50 A @ 200 V

Frequency: Setting range: 360 Hz to 440 Hz

THD (Total Harmonic Distortion): 1% or less (360 Hz to 440 Hz, resistive load)

Crest factor : ≤ 4

Load power factor: 0 to 1 (leading or lagging phase, 360 Hz to 440 Hz, external power injection and regenerative operation are not possible)

Remote Sense:

Microwave L: Maximum 10V guaranteed

Range H: Maximum 20V guaranteed

Measurement function (AC values are RMS)

AC voltage:

Phase voltage measurement range: 0–155.0 V / 0–310.0 V

Line voltage measurement range: 0–269.0 V / 0–537.0 V

Alternating current: Measurement range:

L: 0.00–35.00 A

H: 30.0–350.0 A

Frequency: Measurement range: 360 Hz to 440 Hz

AC active power: Measurement range:

L: 0.000–3.500 kW

H: 3.00–40.00 kW

Power factor: Measurement range: 0 to 1.000 (calculation formula: W/V×A)

Interface: USB (HOST); USB (DEVICE); LAN; RS-232C

Power supply: Input Rating: three phase three wire

Input voltage/ frequency: AC 200V ± 10% / 47 to 63Hz

Power factor (at maximum load): 0.90 or higher

Efficiency (at maximum load): 80% or more (at full load)

Input power: With PFC at maximum load.: 41.7 kVA

Input current: 3-phase 3-wire AC 180 V maximum load: 133.6 A

External dimensions: Including protrusions: W 600 x H 948 x D 986 [mm]　

Fixing method: Fixation by leveler

Movement method: Self-propelled with casters

Environmental conditions: Operating environment: indoor use

Operating temperature: 0°C to +40°C

Operating humidity: 20% Rh to 85% Rh (no condensation)

Cooling method: Forced air cooling by fan

Withstand voltage:

Input-Output: AC 1500 V, 1 minute

Input-FG section: AC 1500 V, 1 minute

Insulation resistance: Input-FG section: DC 500 V, 30 MΩ or more

Features

Standardized PLC , DI/DO, and RS-232C/USB/LAN interfaces, along with optional GPIB/RS-232C converters and external analog input control (0-10Vdc), enable PC-based or PLC-based automatic control. The standard output voltage is 310V (line voltage 537V), allowing for the reproduction of power supply environments worldwide. Furthermore, an extended output voltage of 350V (line voltage 606V) is available, enabling voltage fluctuation testing (±20%).

It comes standard with a time-delayed current limit function that corresponds to the motor's starting current. Furthermore, with an optional upgrade, it can handle instantaneous overload output up to three times the normal level, enabling testing of all types of rotating equipment.