KONICA MINOLTA CM-5 벤치탑 분광 광도계

Illumination/viewing system

Reflectance: di:8°, de:8° (diffuse illumination: 8° viewing) / SCI (specular component included) / SCE (specular component excluded) switchable

Conforms to CIE No. 15, ISO 7724/1, ASTM E 1164, DIN 5033 Teil 7, and JIS Z 8722 (Condition c)

Transmittance: di:180° (diffuse illumination: 180° viewing)

Integrating sphere size: Ø152 mm

Detector: Dual 40-element silicon photodiode arrays

Spectral separation device: Planar diffraction grating

Wavelength range: 360 nm to 740 nm

Wavelength pitch: 10 mm

Half bandwidth: Approx. 10 nm

Measurement range: 0 to 175 % (Reflectance or transmittance); Output/display resolution: 0.01%

Light source: Pulsed xenon lamp

Measurement time: Approx. 1 s (to data display/output); Minimum measurement interval: Approx. 3 s

Measurement/ illumination area

Reflectance: Changeable by changing mask and settings.

LAV: Ø30 mm/Ø36 mm; MAV (optional): Ø8 mm/Ø11 mm; SAV (optional): Ø3 mm/Ø6 mm

Transmittance: Ø20 mm

Repeatability: Spectral reflectance: Standard deviation within 0.1% (400 nm to 740 nm) Chromaticity value: Standard deviation within ΔE*ab 0.04

* When a white calibration plate is measured 30 times at 10-second intervals after white calibration

Inter-instrument agreement: Within ΔE*ab 0.15 (Typical)

(Based on 12 BCRA Series II colour tiles compared to values measured with a master body at 23°C)

Transmittance chamber: No sides (unlimited sample length); Depth (maximum sample thickness): 60 mm Sample holder (optional) for holding sheet samples or containers of liquid samples can be installed/removed

Display: 5.7-inch TFT colour LCD

Display languages: English, Japanese, German, French, Italian, Spanish, Simplified Chinese

White calibration: Automatic white calibration (reflectance)/100% calibration (transmittance) using internal white calibration plate

(Not available when using petri dish or transmittance cell)

Interfaces: USB 1.1 (Connection to PC; USB memory stick); RS-232C standard (Connection to serial printer)

Observer: 2° Standard Observer or 10° Standard Observer

Illuminant: A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12, ID50, ID65 (simultaneous evaluation with two light sources possible)

Displayed data: Spectral values, spectral graph, colorimetric values, colour-difference values, colour-difference graph, pass/fail judgment, pseudo colour, colour assessment

Colour space: L*a*b*, L*C*h, Hunter Lab, Yxy, XYZ, Munsell, and colour differences in these spaces (except for Munsell)

Index

Reflectance: MI; WI (ASTM E 313-73, ASTM E 313-96); YI (ASTM E 313-73, ASTM E 313-96, ASTM D 1925); ISO Brightness, B (ASTM E 313-73)

Transmittance: Gardner, Iodine, Hazen (APHA), European Pharmacopoeia, US Pharmacopeia

User index: User-defined index

Color-difference equation: ΔE*ab (CIE 1976), ΔE*94 (CIE 1994), ΔE00 (CIE 2000), ΔE (Hunter), CMC (l: c)

Pass/fail judgment: Tolerances can be set to colorimetric values (except Munsell), colour-difference values, or reflectance index values

Storable data: Sample data: 4,000 measurements; Target colour data: 1,000 measurements

USB memory stick storage: Storage of measurement data and target colour data. Storage/reading of measurement condition settings

(Security-enabled USB memory sticks cannot be used.)

Power: AC 100 to 240 V, 50/60 Hz (using exclusive AC adapter)

Size: Slide cover closed: 385 (W) × 192 (H) × 261 (D) mm

Slide cover open: 475 (W) × 192 (H) × 261 (D) mm

Weight: Approx. 5.8 kg

Operating temperature/ humidity range: 13 to 33°C, relative humidity 80 % or less (at 35°C) with no condensation

Storage temperature/ humidity range: 0 to 40°C, relative humidity 80 % or less (at 35°C) with no condensation

Included:

Target Mask 30mm CM-A197

Dust cover CM-A191

Ground cable CM-A211

AC Adapter

USB Cable IF-A19

Transmittance Mask CM-A200

Instruction Manual

Inspection Certificate

Datasheet