+ Wiring connections : 1P 2W, 1P 3W, 3P 3W, 3P 4W + Voltage : 150 / 300 / 600 /1000V + Current : Max 3000A + Frequency meter range 40~70Hz
•
Can measure Flicker in accordance to IEC 61000-4-15 and EN50160 standards. Using our Flicker sensor, available as optional accessory, Pst value (short term severity in 10 minutes value) and the Plt value (long term severity in 2 hours value) can be measured.
•
12 kinds of Power Measurements for Power Control and Applicable to Power Quality Control including Harmonics Analysis.
•
One click easy-to-use operation helps complicated setting and processing of large data through the setting / analyzing software provided as accessory.
•
Direct communication with PC via USB cable
•
Built-in Input / Output Function of external signal enables the signal transmission to alarms.
•
2-way power supply by AC and Battery, and Nickel hydrogen battery usable with rechargeable function.
•
Pull / Insert of CF card possible whenever on recording under the function of memory backup device.
•
Can monitor insulation at leakage current by using optional leak clamp sensors.
•
Built-in Print Screen Function enables to record display screen (Records 512 screens by using CF card: 1 screen 40KB).
•
Can display Waveform and Vector, and can confirm the wiring connection, too.
•
Complies fully with International Safety Standards IEC 61010-1 CAT.III 600V.
* Attention for KEW6310 customers:
Flicker measurements are possible with firmware of KEW6310 upgrade (Ver.2.01), PC software PQA Master upgrade (Ver. 2.01) and an optional accessory Flicker sensor KEW8325F.
