인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결

Test parameter: |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR
Test frequency: 12Hz-600kHz
Basic testingf accuracy: 0.05%
Equivalent circuit: In series, in parallel
Mathematical functions: Percentage deviation
Range way: Automatic, hold, manual selection
Trigger mode: Internal, manual, external, bus
Measure speed (≥1kHz): High speed: The fastest is 75 times/second (customizable), middle: 12times/second,low: 3times/second
Average time: 1-255
Delay time: 0-6s, step is 1ms
Display mode: Open circuit/short circuit/quick reset
Calibration function: Direct reading, Δ, Δ%, V/I (Measured voltage/current monitoring)
Displayer: digit display of main and minor parameters, 4.3 inch true color LCD displayer
Testing signal:
Output impedance: 30 Ω, 1000, 10/100, 10/CC optional
Test signal level:
Normal: 5mV~2V
Accuracy: 10%, 1mV step
Constant level: 10mV-1V
Accuracy: 5%, 1mV step
See product manual for details
DC bias source
Internal: 0V, 1.5V, 2V, Accuracy 1%
Matching: IV1A:0~1A DC bias source option
Display range:
|Z|, R, X: 0.01mΩ - 99.9999MΩ
DCR: 0.001mΩ - 99.9999MΩ
|Y|, G, B: 0.00001μS - 99.99995
C: 0.00001pF - 9.9999F
L: 0.00001μH – 99.9999kH
D: 0.00001-9.9999
Q: 0.00001-9999.9
θ (DEG): -179.999°-179.999°
θ (RAD): 3.14159-3.14159
Comparator function: 10 grades (9 grades qualified, 1 grade not qualified), otherwise with AUX grade
Multiparameter: Four parameters can be selected for simultaneous measurement and display
Curve scan function: Under various test conditions, perform graphic scanning analysis on the test piece
Storage: More than 100 sets of internal instrument settings for storage/call, U disk extension of more than 500 sets
Interface: Standard with RS232C, HANDLER, USB HOST, USB DEVICE, Headphone jack, Foot pedal interface; Compatible with GPIB, LAN
Instrument size (WxHxD): 265x100x340 mm
Net weight: 4.5 kg
Gross weight: 5.8 kg



