MATRIX MCR-6600A 고정밀 LCR 미터 (12Hz-600kHz)

Test parameter: |Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR

Test frequency: 12Hz-600kHz

Basic testingf accuracy: 0.05%

Equivalent circuit: In series, in parallel

Mathematical functions: Percentage deviation

Range way: Automatic, hold, manual selection

Trigger mode: Internal, manual, external, bus

Measure speed (≥1kHz): High speed: The fastest is 75 times/second (customizable), middle: 12times/second,low: 3times/second 

Average time: 1-255 

Delay time: 0-6s, step is 1ms

Display mode: Open circuit/short circuit/quick reset 

Calibration function: Direct reading, Δ, Δ%, V/I (Measured voltage/current monitoring)

Displayer: digit display of main and minor parameters, 4.3 inch true color LCD displayer

Testing signal: 

Output impedance: 30 Ω, 1000, 10/100, 10/CC optional

Test signal level:

    Normal: 5mV~2V 

    Accuracy: 10%, 1mV step 

    Constant level: 10mV-1V 

    Accuracy: 5%, 1mV step 

    See product manual for details

DC bias source 

    Internal: 0V, 1.5V, 2V, Accuracy 1%

    Matching: IV1A:0~1A DC bias source option

Display range:

    |Z|, R, X: 0.01mΩ - 99.9999MΩ

    DCR: 0.001mΩ - 99.9999MΩ

    |Y|, G, B: 0.00001μS - 99.99995

    C: 0.00001pF - 9.9999F

    L: 0.00001μH – 99.9999kH

    D: 0.00001-9.9999

    Q: 0.00001-9999.9

    θ (DEG): -179.999°-179.999°

    θ (RAD): 3.14159-3.14159

Comparator function: 10 grades (9 grades qualified, 1 grade not qualified), otherwise with AUX grade

Multiparameter: Four parameters can be selected for simultaneous measurement and display

Curve scan function: Under various test conditions, perform graphic scanning analysis on the test piece

Storage: More than 100 sets of internal instrument settings for storage/call, U disk extension of more than 500 sets

Interface: Standard with RS232C, HANDLER, USB HOST, USB DEVICE, Headphone jack, Foot pedal interface; Compatible with GPIB, LAN

Instrument size (WxHxD): 265x100x340 mm

Net weight: 4.5 kg

Gross weight: 5.8 kg

Datasheet

Catalog