빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Volume: approx. 449 liters
Interior dimension: width 1040 x height 720 x depth 600 mm
Exterior dimension: width 1224 x height 1613 x depth 784 mm
Stainless steel grids (standard): 2
Max. number of grids/shelves: 8
Working temperature range: -12 to 60°C (not suitable for long-term storing at sub-zero temperatures. During permanent operation, the glass door may ice over)
Setting accuracy temperature: 0.1°C
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
ControlCOCKPIT:TwinDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.
German, English, French, Spanish, Polish, Czech, Hungarian language settings available on the ControlCOCKPIT
Timer: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function SetpointWAIT: the process time does not start until the set temperature is reached
Calibration: three freely selectable temperature values
Adjustable parameters: temperature (Celsius or Fahrenheit), fan speed, programme time, time zones
Programme stored in case of power failure
AtmoCONTROL software on a USB stick for programming, managing and transferring programmes via Ethernet interface or USB port
ControlCOCKPIT with USB port for uploading programmes, reading out protocol logs, activating the User-ID function
Displaying of already logged protocol data on the ControlCOCKPIT (max 10,000 values correspond to approx. 1 week)
Interface: Ethernet, USB
Ethernet interface on the rear of the appliance for reading out the protocol log and for uploading programmes and for online logging
PID microprocessor control with integrated auto-diagnostic system
Internal data logger with a storage capacity of at least 10 years
Temperature control: mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 10°C above nominal temperature
Temperature control: over- and undertemperature monitor TWW, protection class 3.3 or adjustable temperature limiter TWB, protection class 2, selectable on display
AutoSAFETY: additionally integrated over and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over or undertemperature, heating is switched off in case of overtemperature, compressor in case of undertemperature
Autodiagnostic system: for fault analysis
Alarm: visual and acoustic
Air jacket heating system for gentle all-around heating
No drying-up of the load caused by the cooling device due to separation of thermal jacket from interior
Cooling: cooling compressor with climate-neutral refrigerant CO2 (R744), GWP1
Highly efficient automatic defrosting system
Two leaves door: fully insulated stainless steel door with 2-point locking, inner glass door
Structured stainless steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel
Ambient temperature: 15 – 28°C (up to 34°C with limited temperature range)
Humidity: max. 70% rh, non-condensing
Voltage: 230 V, 50/60 Hz
Electrical load: approx. 1200 W
Installation: mounted on lockable castors
Accessories:
+ Stainless steel grid, 2 pcs
+ Calibration certificate for 10°C and 37°C (Memmert supply)
+ Manual
