빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Volume: 449 liters
Interrior dimensions: 1040W x 720H x 600D mm
Exterior dimensions: 1224W x 1247H x 784D mm
Stainless steel grids: 2
Max. number of grids: 8
Max. loading per grid: 20 kg
Max. loading of chamber: 300 kg
Working temperature range: min. 5 above ambient temperature to 80°C
Setting accuracy: 0.1°C
Natural convection
Two high-resolution TFT colour display with touch-sensitive buttons for selection of functions
Available parameters on the Control COCKPIT: temperature (Celsius or Fahrenheit), exhaust air flap position, programme time
2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error
Ethernet interface on the rear of the appliance for reading out the protocol log and for online logging
PID microprocessor control with integrated auto-diagnostic system
Structured stainless-steel housing, scratch-resistant, robust and durable; rear of zinc-plated steel
Internal data logger with a storage capacity of at least 10 years
Language setting: German, English, Spanish, French, Polish, Czech, Hungarian
Timer: digital backwards counter with target time setting, adjustable from 1 minute to 99 days
Function setpoint WAIT: the process time does not start until the set temperature is reached
Calibration: three freely selectable values each
Programme stored in case of power failure
Autodiagnostic system for fault analysis
Door: fully insulated stainless steel door with 2-point locking, inner glass door, two leaves
Ambient temperature: 5 – 40°C
Humidity: max. 80% rh, non-condensing
Voltage: 230 V, 50/60 Hz
Electrical load: 1800 W
Installation: mounted on lockable castors
Accessories:
+ Works calibration certificate at 37°C (Memmert supply)
+ Stainless steel grid, 2 pcs
+ Manual
