MEMMERT IPP1060eco Peltier-cooled incubator (1060L)

Volume: 1060L

Interior dimension: width 1040 x height 1200 x depth 850 mm

Exterior dimension: width 1224 x height 1720 x depth 1005 mm

Stainless steel shelves (standard): 2

Max. number of perforated shelves: 14

Setting temperature range: 0-70ºC

Working temperature range without light: from 0 (at least 20 below ambient temperature) to 70ºC

Setting accuracy temperature: 0.1ºC

Temperature sensor: 1 Pt100 sensor DIN class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error

Language setting: German, English, Spanish, French, Polish, Czech, Hungarian

ControlCOCKPIT: SingleDISPLAY. Adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-colour displays.

Time: Digital backwards counter with target time setting, adjustable from 1 minute to 99 days

Function SetpointWAIT: the process time does not start until the set temperature is reached

Calibration: three freely selectable temperature values

Adjustable parameters: temperature (Celsius or Fahrenheit), CO2, programme time, time zones, summertime/wintertime

Forced ventilation by Peltier fan

Programme stored in case of power failure

Temperature control: adjustable electronic overtemperature monitor and mechanical temperature limiter

Autogiagnostic system: for fault analysis 

Energy-saving Peltier heating-/cooling system integrated in the rear (heat pump principle)

Voltage: 230 V, 50/60 Hz 

Electrical load: approx. 1300 W

Ambient temperature: 16 °C to 40 °C

Humidity rh: max. 70 %, non-condensing

 Datasheet