Memmert ONE10 오일 항온수조 (10 리터)
문의하기
안전한 결제
품질 보장
간편 교환 및 반품
배송 가능
Specifications:
| Controller | digital display (LED) of all set parameters, such as temperature and alarm values (0,1°C resolution) as well as time values |
|---|---|
| Timer | digital timer from 1 min. up to 999 hours for: ON (continuous operation), DELAYED ON, HOLD or HOLD set-temperature dependent with guaranteed holding time |
| Calibration | on controller |
| Temperature sensor | 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value |
|---|---|
| Temperature control | mechanical temperature limiter TB protection class 1 switching the heating off at approx. 30°C above max. temperature of the bath |
| Temperature control | independently working, electronic overtemperature temperature limiter TWB protection class 2 |
| Temperature control | in case of overtemperature due to failure, the heating is switched off at approx. 10°C above the set temperature (fixed value) |
| Autodiagnostic system | fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication |
| Alarm | visual and acoustic alarm at programme end and as input acknowledgement as well as in case of low liquid level, heating is switched off automatically |
| Setting temperature range | +20 to +200 °C | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Working temperature range | min. 5 above ambient up to +200 °C | ||||||||||
| resolution of display and setting accuracy | 0,1°C up to +99,9°C / 1°C from 100°C | ||||||||||
|
빠른 지원
인증된 전문가에게 직접 연결