빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Volume: 49 liters
Interior dimension: width 385 x height 385 x depth 330 mm
Exterior dimension: width 550 x height 680 x depth 480 mm
Standard equipment: 01 stainless steel grid
1 thermoshelf of aluminim
Fuzzy-supported MLC (Multi-Level-Controlling) microprocessor controller adapting its performance to the volume (local temperature sensing) for each thermoshelf
Temperature measured through 4-wire Pt100 sensor individually for each thermoshelf
Setting temperature range: +5°C to +90°C
Temperature range: +5°C to +90°C
Temperature variation in time (to DIN 12 880: 2007-05): ≤ ± 0.3
Temperature uniformity (surface) at +20 °C/50 mbar: ≤ ±1
Real-time/weekly programmer with group function (e.g. Monday – Friday). Timer with residual running time: max. 40 ramps (each 1 min. up to 999 h) programmable through controller
or MEMoryCard XL; programming via PC and free-of-charge software: unlimited number of ramps
Integrated timer for tempering and pressure (vacum) profiles of up to 40 ramps, parameters time, pressure and temperature (setpoint dependent) individually adjustable for each segment from 1 min. up to 99 hrs
Digital display of all set parameters, such as temperature, weekdays, time, pressure, programe status and set-up values
Separate LED-symbol for each thermoshelf in operation
Digital display of actual temperature for each thermoshelf individually
Resolution of display for setpoint values 0.1°C up to 99.9°C, 0.5°C from 100°C
Resolution of display for actual values 0.1°C up to 99.9°C, 0.5°C from 100°C
Calibration facility through controller for three freely selectable temperature and pressure values
Integrated ring memory as data logger for GLP-conforming long-term documentation of all relevant parameters - 1024 kB
Programme stored in case of power failure
USB-interface incl. Memmert software "Celsius" for programming and documentation of temperature and pressure
Setting of language for dialogue and display D / UK / E / F / I
Vacuum connection with small flange DN16, and gas inlet with small flange DN 16
works calibration certificate for +160°C at 20 mbar pressure for each additionally supplied thermoshelf together with the vacuum oven
Vacuum control: digital electronic pressure control through solenoid valves
Adjustment range from 10 mbar to 1100 mbar - digital (LED)
Setting accuracy 1 mbar
Digital display of actual pressure from 5 mbar up to 1100 mbar
One programmable, digitally controlled inlet for air
Rapid air intake for door opening (door is blocked under vacuum ) - programme reactivation at stored values
Vacuum drying process (vacuum cycles) is continued after power failure
Permitted final vacuum: 0.01 mbar
Maximum leakage rate: 0.01 bar/h
Additional digitally adjustable, electronic micro-processor overtemperature monitor TWW, protection class 3.1 - (max-value for overtemperature, min-value for undertemperature)
Additionally integrated over- and undertemperature protection "ASF", automatically following the setpoint value at a preset tolerance range, alarm in case of over- or undertemperature, heating of the individual shelf is switched off in case of overtemperature
Automatic overtemperature protection for each thermoshelf following the setpoint-value (MLOP - Multi-Level-Overtemperature-Protection) switching the heating of the shelf off at about 3°C above setpoint value
Mechanical temperature limiter TB, protection class 1 according to DIN 12880 to switch off the heating approx. 20°C above nominal temperature
100% safety for air (100% AtmoSAFE)
Full-sight glass door, inside spring-loaded, 15 mm thick glazed panel in safety glass, outside with anti-splitter screen
Rear zinc-plated steel
Hermetically welded stainless steel interior of extremely corrosion-resistant stainless steel, material 1.4404
Additional interior mountings of stainless steel, material 1.4404 (removable for cleaning), consisting of mounting at the sides with guide bars for thermoshelves and on top (diffusor) to avoid turbulences when aerating
All tubings made of stainless steel, material no. 1.4571
1 thermoshelf of aluminim, material 3.3547 (ASTM B209) with integrated large-area heating
Voltage/ Power rating: 230 V (+/- 10 %), 50/60 Hz / approx. 500 W
Including:
+ Vacuum pump
+ Works calibration certificate of manufacture
+ Memmert software "Celsius", 1 MEMoryCard XL
+ 1 thermoshelf of aluminim
+ Manual
