MEMMERT WNE14 워터 배스 (10 ~ 95°C, 14L)

Temperature

Setting temperature range: +10 to +95 °C and boiling stage

Working temperature range in °C: min. 5 above ambient up to +95 °C with additional boiling mode

Resolution of display and setting accuracy: 0,1°C up to +99,9°C / 1°C from 100°C

Control of standard components

Controller: digital display (LED) of all set parameters, such as temperature and alarm values (0,1°C resolution) as well as time values

Timer: digital timer from 1 min. up to 999 hours for: ON (continuous operation), DELAYED ON, HOLD or HOLD set-temperature dependent with guaranteed holding time

Calibration: on controller

Safety

Temperature sensor: 2 Pt100 sensors Class A in 4-wire-circuit, mutually monitoring and taking over the performance at the same temperature value

Temperature control: mechanical temperature limiter TB protection class 1 switching the heating off at approx. 30°C above max. temperature of the bath

Temperature control: independently working, electronic overtemperature controller TWW protection class 3.1 or overtemperature limiter TWB protection class 2, adjustable in set-up menu by customer

Temperature control: in case of overtemperature due to failure, the heating is switched off at approx. 10°C above the set temperature (fixed value)

Autodiagnostic system: fuzzy-supported PID microprocessor controller with integrated autodiagnostic system with fault indication

Alarm: visual and acoustic alarm at programme end and as input acknowledgement as well as in case of low liquid level, heating is switched off automatically

Heating concept

Heating Baths: corrosion-proof large-area heating on three sides

Stainless steel interior

Dimensions W x H x D in mm: w(A) x h(C) x d(B): 350 x 140 x 290 mm

Interior: easy-to-clean interior, made of stainless steel, reinforced by deep drawn ribbing, material no. 1.4301 (ASTM 304), laser-welded

Volume: 14 l

Liquid level min.: 97 mm

Liquid level max.: 120 mm

Textured stainless steel casing

Dimensions: w(D) x h(G) x d(E): 578 x 347 x 436 mm

Electrical data

Voltage: 230 V, 50/60 Hz

Electrical load: approx. 1800 W (during heating)

Ambient conditions

Installation: The vent openings in the left and back side must remain unobstructed. Minimum wall spacing on all sides is 80 mm. The minimum spacing from the top of the bath to the next ceiling is 750 mm.

Ambient temperature: +5 °C to +40 °C

Humidity rh: max. 80 %, non-condensing

Overvoltage category: II

Pollution degree: 2

Packing/shipping data

Transport information: The appliances must be transported upright

Customs tariff number: 8419 8998

Country of origin: Federal Republic of Germany

WEEE-Reg.-No.: DE 66812464

Dimensions approx incl. carton: w x h x d: 670 x 530 x 400 mm

Net weight: approx. 15 kg

Gross weight carton: approx. 21 kg

Datasheet