Michell Instruments EA2-OL-AAAAA Online Dew-Point Hygrometer (-100 ~ +20°C)
Measurement Range: -100 to +20°C (-148 to +68°F) dew point
Accuracy: ±2°C (±3.6°F) dew point*
Response Time: 5 mins to T95 (dry to wet)
Repeatability: 0.5°C (0.9°F) dew point
Sensor Calibration: Traceable 13-point calibration certificate
Electrical Specifications
Online Output Signals: 4–20 mA
Online Output: Dew point or moisture content
Maximum Analog Output Scaled Range: Dew point: -110 up to +20°C (-166 up to +68°F); Moisture content in gas: 0 up to 3000 ppmV
Online Supply Voltage: AC: 85 to 264 V
Online Current Consumption: 60 mA maximum
Electrical Safety: EN61010-1
Operating Specifications
Operating Temperature: Sensor: -40 to +60°C (-40 to +140°F); Monitor: 0 to +50°C (+32 to +122°F)
Compensated Temperature Range: Sensor: -20 to +50°C (-4 to +122°F); Monitor: not applicable
Storage Temperature: Sensor: -40 to +60°C (-40 to +140°F); Monitor: -10 to +60°C (+14 to +140°F)
Operating Pressure: 52.5 MPa (525 barg / 7614 psig) maximum
Sensor Flow Rate: 1 to 5 Nl/min mounted in standard sampling block; 0 to 10 m/sec direct insertion
Mechanical Specifications
Ingress Protection: Sensor: IP66 in accordance with BS EN 60529:1992+A2:2013; NEMA 4 protection in accordance with NEMA 250–2014; Monitor: IP65 (NEMA 4X) front panel only
Sensor Oxygen Service: Optional: Cleaned for enriched oxygen service
Sensor Housing Material: 316 stainless steel
Dimensions: Sensor: L=132 mm × Ø45 mm / L=5.2” × Ø1.77” (with connector cable); Monitor: 1/8 DIN Case, 96 × 48 × 85 mm / 3.78 × 1.89 × 3.35” (W × H × D)
Filter (Sensor Protection): Standard: HDPE <10 µm; Optional: 316 stainless steel sintered guard <80 µm
Sensor Process Connection: 5/8” - 18 UNF; KF40 Flange
Accessories: Flange for 5/8” - 18 UNF process connections
Sensor Weight: 150 g (5.29 oz)
Sensor Electrical Connections: MiniDIN 43650 Form C
Online Sensor Cable: 0.8m connector/cable
Sensor Diagnostic Conditions (factory programmed)
Sensor Fault: 23 mA
Under-range Dew Point: 4 mA
Over-range Dew Point: 20 mA
인증된 전문가에게 직접 연결

