MICROTEST 6225+6632 DC Bias Current Test System (100Hz-30MHz)

Specifications

Frequency Response: 100Hz-30MHz

DC Bias Current Max.: 20A

Power consumption: 320W Max.

 Accuracy (6632): 

0.000A-1.000A 1%+5mA 

1.001A-5.000A 2% 

5.001A-20.000A 3% 

DCR Test: Yes

Constant power output: Yes

Current switch: /

Graphic Scanning Analysis: 

+ Frequency graphic scanning analysis

+ Magnetic saturation curve (Isat)

+ Rated current curve (Irms)

6632 Impedance Analyzer: 

Frequency: 10Hz-50MHz

Frequency Setting: Continuity

Frequency Resolution: 100mHz, 6-bit Frequency Input

Frequency Output Accuracy: ±0.01%

Basic Accuracy: ±0.08% (typical ±0.05%)

AC Drive Level: 

+ Test Signal Voltage Level: 10mV - 2Vrms(100Ω);  10mV - 1Vrms(25Ω)

+ Voltage Minimum Resolution: 1mV

+ Accuracy: ALC ON：6％ * Voltage ±2mV;   ALC OFF：10％ * Voltage ±2mV

+ Test Signal Current Level: 200µA - 20mArms

+ Current Minimum Resolution: 10µA

+ Accuracy:  ALC ON：6％ * Current ± 20µA; ALC OFF：10％ * Current ± 20µA

DC Drive Level: 1V (fixed)

Output Impedance: 25Ω/100Ω (switchable)

DC Bias Voltage: 

+ Built-in ±12V: (100Hz-50MHz)

+ External Voltage Bias: (±12V/±40V/±600V/±2000V)

DC Bias Current: 

+ Option DC Bias Current Source: (20A/60A/120A/320A)

+ External Voltage Bias: (100mA)

Measurement Mode: Meter mode, list mode, sweep mode, and optional equivalent circuit analysis function (S model)

Measurement Parameters: |Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、 ESR、εr 、μr

Test Time (Fastest): < 3mS 

6632 Measurement Parameters

|Z| 0.000 mΩ to 9999.99 MΩ

R, X ± 0.000 mΩ to 9999.99 MΩ

|Y| 0.00000 μS to 999.999 kS

G, B ± 0.00000 μS to 999.999 kS

θRAD ± 0.00000 to 3.14159

θDEG ± 0.000° to 180.000°

Cs, Cp ± 0.00000 pF to 9999.99 F

Ls, Lp ± 0.00 nH to 9999.99 kH

D 0.00000 to 9999.99

Q 0.00 to 9999.99

Δ ± 0.00% to 9999.99%

Rdc 0.00 mΩ to 99.9999 MΩ

εr' εr'' 0 to 100000

μr' μr'' 0 to 100000

System

Measurement Circuit: Series/Parallel

Correction: Open Circuit/Short Circuit/Load correction

Cable Compensation: 0 / 0.5 / 1 /2 (m)

BIN: ABS、ΔABS、Δ%、OFF

Comparator: 9

List Mode: 50 groups of Multi-steps setting (Each group contains up to 15 steps)

Bulit-in Storge: 100 sets LCR setting documents, 50 groups of list mode setting

USB Host Storge: LCR setting documents, list mode setting document, BMP graphics, Sweep screen and test result data

Trigger Test: Auto, manual, RS-232, GPIB, Handler

Power Supply: Voltage：88-264Vac; Frequency：47-63Hz

Power consumption: 30VA

Environment: Temperature：10℃-40℃; Humidity：20-90%RH

Dimension: 

356x147x497 mm (W*H*D) /6225

336x147x340 mm (W*H*D)/ 6632

Weight: 

15 Kg (6225)

3.95 Kg (6632)

Display: Color Screen, 7" TFT (800*480)/ 6632

Interface: RS-232、Handler

Datasheet

Video