MICROTEST 6363 고정밀 LCR 미터 (10Hz-20kHz)

Test Frequency:10Hz-20kHz

Points Of Test Frequency:  Continuity  

Basic Accuracy:  ± 0.08%  

AC Drive Level:  10mV to 2Vrms (1m Vrms solution)  

DC Drive Level:  0.01V-2V  

Output Impedance:  100Ω  

Frequency trimming resolution:  5 Digits  

Frequency output accuracy:  ±0.01%  

AC / DC test speed Max.:  8mS  

Measured Value Detection Mode: Define upper and lower thresholds according to main and sub parameters

ESR: Series/Parallel

Test Mode: Meter mode/Multi-step mode

Test Range: Automatic/Lock

Indicator: Pass/Fail and Built-in speaker

Safety: EN61010-1

Immunity: EN61326-1

Emissions: EN55022 Class A

Calibration: Open Circuit / Short Circuit: Avoid the misreading caused by the stray capacitance from kelvin clips and fixtures

Auto-save when power-off function: When the power is turned off or encounter a power outage, all the data will be saved automatically and recovered when tester system is switched on again

Power Supply: Voltage 90-132Vac or 198-264Vac (selectable) 

       Frequency: 47 ~ 63Hz

Display 800*480 Color Screen, 7" TFT

Interface: RS-232, GPIB, Handler, USB

Flash Memory: Built-in flash for storage of 128 groups of Multi-steps setting

Operation: Auto、Manual、RS-232、GPIB、Handler

Temperature : 10°C to 40°C 

Humidity : 20 ~ 90%

Dimension (W*H*D): 344x145x343 mm

Weight: 3 Kg

Datasheet