MICROTEST 6379 임페던스 미터 (10MHz)

Test Frequency: 10Hz-1MHz

Points Of Test Frequency:  Continuity  

Basic Accuracy:  ± 0.08%  

AC Drive Level:  10mV to 2Vrms (1m Vrms solution)  

DC Drive Level:  0.01V-2V  

Output Impedance:  100Ω  

Frequency trimming resolution:  5 Digits  

Frequency output accuracy:  ±0.01%  

AC / DC test speed Max.:  8mS  

Measured Value Detection Mode: Define upper and lower thresholds according to main and sub parameters

ESR: Series/Parallel

Mathematical Mode:Absolute/Percentage

Test Range: Automatic/Lock

Indicator: Pass/Fail and Built-in speaker

Safety: EN61010-1

Immunity: EN61326-1

Emissions: EN55022 Class A

Calibration: Open Circuit / Short Circuit: Avoid the misreading caused by the stray capacitance from kelvin clips and fixtures

Auto-save when power-off function: When the power is turned off or encounter a power outage, all the data will be saved automatically and recovered when tester system is switched on again

Power Supply:Voltage 90-132Vac or 198-264Vac (selectable) 

               : Frequency 47 ~ 63Hz

Display:320*240 dot-matrix display

Interface: RS-232, GPIB(option), Handler(option)

Flash Memory; Built-in SDRAM for storage of 64 groups of Multi-steps setting (Each group contains up to 30 steps)

Operation: Auto、Manual、RS-232、GPIB(option)、Handler(option)

Temperature : 10°C to 40°C Humidity : 20 ~ 90%

Dimension (W*H*D):337x145x522  mm

Weight: 6.5 Kg