MICROTEST 6630E 고정밀 LCR 미터 (10Hz-10MHz)

Range: 10Hz ~ 10MHz

Minimum Resolution :100mHz, 6-bit Frequency Input

Accuracy: 7 ppm±100mHz

Basic Accuracy: ± 0.08% 

Test Signal Voltage Level: 10mV - 2Vrms

Voltage Minimum Resolution: 1mV

Accuracy: ALC ON：6％ * Voltage ± 2mV

                 ALC OFF：10％ * Voltage ± 2mV

Test Signal Current Level: 200µA - 20mArms

Current Minimum Resolution: 10µA

Accuracy: ALC ON：6％ * Current ± 20µA

              :  ALC OFF：10％ * Current ± 20µA

Test Time  (The fastest): < 3ms

Output Impedance:25Ω/100Ω, switchable (Nominal value)

Parameters:|Z|、|Y|、θ、X、R、G、B、L、D、Q、DCR、C、 Vdc-Idc、ESR

Measurement Mode: Meter mode, Multi-steps mode

Calibration: Open Circuit/ Short Circuit/Load Calibration

Measurement Circuit : Series/Parallel

Multi-steps Mode: 50 groups of Multi-steps setting (Each group contains up to 15 steps)

PC LINK / CPK: Option

Flash Memory: Built-in flash for setting 100 set documents

USB:LCR setting documents, BMP graphics, Test result data

I/O Interface:Handler

Serial Interface: USB、RS232

Parallel Interface: GPIB

Display: 7.0”TFT, 800x480 Color Screen

Temperature: 10℃ ～ 40℃ 

Humidity: ≦80%

Power Supply 

Voltage: 90V ～ 264Vac

Frequency: 47Hz ~ 63Hz

Low power consumption: Maximum 30W (Nominal value)

Dimension (W*H*D):336x147x340 mm

Weight :3 kg

Datasheet