Unlock your scope's potential, all without leaving your lab!

If you own a Tektronix 4/5/6 Series Oscilloscope, you can receive 50% off on a license to upgrade bandwidth and record length, add a function generator, purchase individual or bundled software...

EMIN - Authorized Distributor of Tektronix is excited to announce a great way to extend the capabilities of your oscilloscopes. If you own a Tektronix 4/5/6 Series Oscilloscope, you can receive 50% off on a license to upgrade bandwidth and record length, add a function generator, purchase individual or bundled software. Unlock your scope's potential, all without leaving your lab!

Here are a few ways you can enhance your scope's performance:

• Increase bandwidth to achieve reliable measurement results at higher frequencies

• Extend record length to see more of the measured signal

• Add an integrated arbitrary function generator as a powerful tool for simulating signals or adding noise to existing signals

• Add Spectrum View for correlating time and frequency domains

• Automate advanced power measurements with POWER PRO software bundle

• Troubleshoot high-speed clock measurements with SERIAL DECODE PRO software bundle

Many options available as an exclusive offer for Tek scope owners. Don't wait - contact EMIN today! Offer ends June 27th.

관련 뉴스

2026년 08월 17일 13시 45분 30초

Inserting a Type K Thermocouple Too Shallow Can Cause Measurement Errors

When selecting a Type K temperature probe for a pipe or tank, the measurement location, insertion depth, and heat-transfer conditions should be determined in advance. Even a Type K thermocouple with good accuracy can produce inaccurate readings if it is not installed correctly for the temperature zone being monitored.

2026년 08월 17일 10시 55분 50초

Is a dedicated meter required to measure currents in the range of a few microamperes (µA)?

A multimeter can measure currents in the microampere (µA) range, but the reading captures only a momentary value. When is a DMM sufficient, and when is a specialized current meter required?

2026년 08월 17일 09시 27분 28초

Đừng vội báo giá ngay khi khách hàng đưa ra yêu cầu! Vì sao? Chia sẻ từ Best Sale EMIN

Vì đúng mẫu máy chưa chắc đã đúng nhu cầu. Bán một chiếc máy hiện sóng là đưa khách hàng một thiết bị, còn tư vấn đúng chiếc máy để tìm ra căn nguyên vấn đề của họ mới là phần việc thật sự của một người bán hàng kỹ thuật. Có lẽ đó cũng là lý do giúp anh Bảo giữ vị trí Best Sale EMIN Group năm 2025, không chỉ nhờ hiểu khách hàng, mà còn nhờ vốn kiến thức sâu về những sản phẩm Tektronix mà EMIN đang phân phối.

2026년 08월 17일 09시 24분 21초

The Thinner the Type K Thermocouple, the Faster the Temperature Response

Ultra-thin probes are suitable for measurements that require a fast response, but they generally have lower mechanical strength. Thin wires are more likely to bend or break when exposed to vibration, impact, or strong material flow.

2026년 08월 15일 09시 22분 39초

Measure the board's current consumption in standby mode

A circuit board may function normally yet still consume significant power in standby mode. Particularly in IoT devices, wireless sensors, battery-operated equipment, or low-power control circuits, a difference of just a few microamperes in sleep current can significantly impact battery life