NOVOTEST TS-R-C 로크웰 경도 시험기

Indenter: Conical Rockwell diamond indenter (120 °): diamond tip as a cone with 120 degrees of the cone apex angle and the bead size of 1/16 inch (1.5875 mm)

Scales: 

20-88 HRA

20-100 HRB

20-70 HRC

40-77 HRD

70-100 HRE

30-94 HRG

80-100 HRH

40-100 HRK

Hardness resolution value: 0.1

Measurement accuracy: <1.0%

Conversion scales: Plastic Rockwell, Brinell, Vickers

Initial testing load(accuracy ±2%): 98,07N (10kg)

Testing load (accuracy ±1%): 

588,4N (60kg)

980,7N (100kg)

1471N (150kg)

Measuring time: 5~60 sec

Testing materials: 

+ Cemented carbides, thin steel and shallow case hardened steel

+ Steel, hard cast irons, pearltic malleable iron, titanium, deep case hardened steel & other material harder than HRB 100

+ Thin steel and medium case hardened steel and pearlitic malleable iron

+ Hardened and surface hardened steel, hardened and tempered steel; cold and hard casted parts, forged parts; hard alloy steel; aluminum alloys; bearing steel; carbonized steel sheets and others

Max height of test sample: 100 mm (210 mm – without protective cover) (can be produced up to 400 mm)

Max depth of test sample: 165 mm

Power supply: 220V±5%, 50~60Hz

Data output: 

+ LCD

+ Built-in printer

+ RS-232 interface

Recommended operating conditions: 

+ Air temperature: 0…+40 °С

+ Air pressure: 94 – 106.7 kPa

+ Humidity: up to 65%

Net weight: 86 kg

Gross weight: 96 kg

Package dimensions: 630*500*860 mm (L*W*H)

Standard Package

Rockwell Hardness Tester NOVOTEST TS-R-C

Conical Rockwell diamond indenter (120 °)

Hard alloy steel Rockwell ball indenter (d=1,5875 mm)

Large testing table (d=150 mm)

Medium testing table (d=60 mm)

V-shaped testing table (d=40 mm)

Rockwell hardness test blocks (5 pcs. in total):

HRA: 85±5 – 1pc.

HRB: 90±5 – 1pc.

HRC: 65±5 – 1pc.

HRC: 45±10 – 1pc.

HRC: 25±5 – 1pc.

RS-232 interface

Bolt adjustor (4 pcs.)

Power cable

Fuse (2pcs.)

Operating manual

Calibration certificate

Transportation box