빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
Operating frequency range: 1 to 10,0 MHz
Range of measured time intervals: 6 to 1000 µs
Velocity range: 1000 – 9999 m / s
Error of measurement of time intervals: not exceed ± 0,025 µs
Maximum permissible error of measurement of the amplitudes of the signals at the receiver input in the range from 0 to 110 dB: not exceed ± 0,5 dB
Testing gain range: 125 dB
Averaging over the quantity of starts: 1 to 16
Range of variation of temporal sensitivity adjustment (TVG): 40 dB
Number of control points TVG 15
Duration of the excitation pulse to the load: 0,0 to 0,5 µs
Amplitude of the excitation pulse to the 50 Ohm load, not less: 100, 200, 300
Operating frequency range of the receiver on the level -3 dB: 1 to 10 MHz
Deviation of the amplitudes of input signals in the range from 10 to 100% of the screen height not more than 1 dB
Scanning: 1 to 1000 µs
Delay of scanning: 0 to 2000 µs
Range of measurement of time intervals: 0 to 1000 µs
Setting a delay in the prism of the probe: 0 to 15 µs
Automatic signaling of defects (AFS): dual-gate
Setting range of AFS gates: 0 to 2000 µs
Adjusting thresholds of AFS gates: 0 to 100 % of screen height
Detection of signals: positive half-wave, radio mode
Dimensions (W*H*L): 80*162*38 mm
Weight, not more: 250 g (without batteries)
Mean time between failures: not less than – 3000 hours
Standard package: Ultrasonic flaw detector, UT-probes – 2 pcs, Cable Lemo-Lemo – 1 pc, AA batteries – 3 pcs, Charger, USB cable for PC connection, Operating manual, Case
Description
Ultrasonic flaw detector UD2301 is designed for nondestructive testing of metals, plastics, glass, composite materials, weld inspection and measurement thickness of the various products and structures.
Flaw detector allows user to detect various defects such as discontinuities, cracks and heterogeneity of materials in semi-finished products and welded joints, to measure the depth and coordinates of defects, the thickness of products, the speed of propagation and attenuation of ultrasonic vibrations (UT) in the material.
Ultrasonic Flaw detector is produced in small housing with optimal size for performing testing in tight spaces. Device has color display with high resolution 320*480 pixels, which significantly improves the usability of the device.
Manual
VIDEO 1
VIDEO 2
