Overall dimension: Main tester: 185 × 105 × 50 mm; receiver: 218 × 46 × 29 mm; remote identifier: 84 × 34 × 27 mm.
Power: Two laminated 9 V batteries.
Display: Big LCD screen; special 4 × 16 characters (valid visual field: 61.6 × 25.2 mm).
Type of cable tested: STP/UTP twisted pair cable, coaxial cable.
Type of cable detected: Cat 5E, Cat 6E, telephone wire, coaxial cable, USB cable, and other metal wires.
Ambient operating temperature: -10 ℃ ~ +60 ℃.
Tester port:
Tester RJ45 master port (M)
Tester LOOPBACK RJ45 port (L)
RJ45 Scan (RJ45 cable tracing)
Remote identifier RJ45 port (R)
Extra BNC and RJ11 converters are used to measure and check the continuity of coaxial cable and telephone line.
Length measurement of twisted pair cable:
Range: 1 ~ 350 m (3 ~ 1000 ft)
Calibration accuracy: 3% (±0.5 m or ±1.5 ft) (calibrating cable > 10 m)
Factory accuracy: 5% (±0.5 m or ±1.5 ft) (AMP, AT&T Class 5 cable)
Display unit: m or ft
Length calibration:
User can set calibration coefficients manually using a cable of known length.
The calibration cable length must be more than 10 m.
Wire sequence and cable fault locating:
Detects open circuit, short circuit, reverse connection, and cross-over.
Automatic time-delay shut-off:
인증된 전문가에게 직접 연결