ONMEAS AT2513 DC Ultra-Low Resistance Tester (1 CH; 0.01μΩ ~ 300.000Ω)

Channels: Single Channel

Measurement Parameters: DC Resistance

Basic Accuracy: 0.02% ±3 digits

Measurement Range: 0.01μΩ ~ 300.000Ω

Signal Source: Maximum Current: < 10A

Current Mode: Pulse current, Bidirectional current

Range: Six ranges, manual and automatic

Measurement Speed: Fast 10/sec, Slow 1/sec

Display Results: Direct reading / ΔABS / Δ% and sorting results

Maximum Reading: 300000

Calibration: Open and short circuit correction

Comparator: Upper limit / Lower limit / Comparator off

Trigger Mode: Internal trigger, Manual trigger, External trigger

Temperature Compensation: Accuracy: 0.2°C / Range: 0~80°C

Test Terminals: Four-terminal testing

Contact Check Function: Supported

Instrument Dimensions: 264 x 107 x 350mm

Net Weight: 2.5kg

Power Requirements: Voltage: 90-250VAC, Frequency: 50/60Hz, Power: 15VA

Interface: RS232/RS485/LAN/USB Drive

Others: 5-inch touchscreen; Keyboard lock and data hold function

Datasheet