ONMEAS AT2617 Capacitance Tester (100Hz, 120Hz, 1kHz, 10kHz, 100kHz)

Measurement Parameters: Cs-Rs, Cs-D, Cp-Rp, Cp-D, Rs-Q, Rp-Q, Z-D, Z-Q

Basic Accuracy: 0.1%

Test Frequency: 100Hz, 120Hz, 1kHz, 10kHz, 100kHz (5 points, 0.01%)

Test Range: Auto, Manual, and Nominal, 9 ranges

Test Speed: 30 readings/s, 10 readings/s, 3 readings/s

Output Impedance: 30Ω, 100Ω

Signal Level: ACV: 10.00mV~2.00V, Accuracy: 10%, CV Mode Accuracy: 6%

Monitor Parameters: Z, R, Δ, Δ%

Readings: All parameters 5 digits full: 99999

Display Range

C: 0.0001pF – 9.9999mF

R, X, Z: 0.0001Ω - 99.999MΩ

D: 0.0001 – 9.9999

Q: 0.0001 – 9999.9

Δ%: -999.999% - 999.999%

Equivalent Mode: Series and parallel equivalent

Average Count: 1~256

Trigger Mode: Internal, Manual, External, and Remote

Trigger Delay: 0.01ms~60s

Comparator: PASS bin (BIN1-BIN3): Both primary and secondary parameters pass; AUX bin: Primary parameter passes but secondary parameter fails; FAIL bin (OUT): Primary parameter fails. HI/ IN/ LO: Primary parameter high/ pass/ low

Comparison Mode: Sequential/Absolute Deviation/Relative Deviation

Calibration: Open circuit zero, short circuit zero (sweep frequency and spot frequency)

File: Internal storage: 10 files; External USB storage: 10 files

Data Logging: 9999 groups of files (.csv)

Beeper Function: Off/Pass/Fail

nstrument Dimensions: 264(W)x107(H)x349.5(D)mm

Net Weight: 3kg

Power Requirements: 90V-260VAC, 50Hz to 60Hz

Interface: Handler interface/RS232 interface (Standard); RS485 interface/GPIB interface (Optional)

Communication Protocol: SCPI/Modbus

Datasheet