For full functionality of this site it is necessary to enable JavaScript.
EMIN.VN
0
Product image

PEGO PG-PCT 전원 코드 앵커리지 토크 시험 장치 (0.1N.m, 0.15N.m, 0.25N.m, 0.35N.m, 0.425N.m)

문의하기
안전한 결제
품질 보장
간편 교환 및 반품
배송 가능

Torque disk diameter: 100mm

Weight: 2N/3N/5N/7N/8.5N*1

Torque range: 0.1N.m, 0.15N.m, 0.25N.m, 0.35N.m, 0.425N.m

The power cord anchorage torque test apparatus is designed according to IEC60884-1 clause 23.2 (table 18) and VDE0620 clause23.2 (table18). It’s used to test the power cords and flexible cables of household appliance and similar appliance. The torque test shall be carried out after the completion of retention test. The flexible cable is subjected for 1 min to a torque as specified in table 18. After the tests, the flexible cable shall not have been displaced by more than 2 mm. For rewirable accessories, the end of the conductors shall not have moved noticeably in the terminals; for non-rewirable accessories, there shall be no break in the electrical connections.

For measurements of the longitudinal displacement, a mark is made on the flexible cable at a distance of approximately 20 mm from the end of the specimen or the flexible cable guard, before it is subjected to the pull.

If, for non-rewirable accessories, there is no definitive end to the specimen or the flexible cable guard, an additional mark is made on the body of the specimen.

The displacement of the mark on the flexible cable in relation to the specimen or flexible cable guard is measured while the flexible cable is subjected to the pull.

혜택 소식 받아보기

대량 할인, 도매 가격 업데이트 및 신제품 소식을 이메일로 받아보세요.

구독하면 당사의 서비스 이용약관 및 개인정보 처리방침에 동의하는 것으로 간주됩니다.

빠른 지원

인증된 전문가에게 직접 연결