PEGO PG-SC-100 IP5/6X 방진 시험 챔버 (400*500*500)

Working dimension(mm): 400*500*500

Working power: AC 380V±10%, 50Hz

Temperature range: RT~+70℃

Temperature evenness: ≤2℃

Temperature fluctuation: ≤±0.5℃

wire diameter of metal net: 50μm

Wire interval: 75μm

Airflow velocity: ≤ 2.5m/s

Time range: 1S~999H (adjustable)

Vibration time: 1S~999H (adjustable)

Dust concentration: 2~4kg/m3

Sand and dust: talcum powder, dry powder, portland cement paste

Power socket for EUT: IP66, 220V/16A

Circulatory system: Dust recycling

Working condition

Temperature:15℃～35℃, humidity:≤85%R.H.

Configuration: Observe window equip with window wiper, lamp

Power supply: 2KW, AC220V±10%, 50Hz

Dust chamber is designed according to the standards of GB/T10485-2007, GB2423.37-2006 test L, GB208-2008, IEC60529 (IP code), GB7001-1986 and etc..

Dust chamber is for IP5X and IP6X testing, the power shall be able to pass through a square-meshed sieve the nominal wire diameter of which is 50μm and the nominal width of a gap between wires 75 μm.

The dust chamber is controlled by 7 inch touch screen and PLC system. The interior of the cabinet is equipped with lighting and power supply, which can be used for live dust-proof test of the sample to simulate a more realistic use environment. There is a mesh sample support plate inside the box for Dust recycling, it is made of stainless steel and has a load capacity of 50KG. Operation video: https://youtu.be/xEe--St0Yzo   

IP5X dustproof test chamber: the protection is satisfactory if the power has no accumulated in a quality which may interface the correct operation and cause harmful to equipment.

IP6X dustproof test chamber: the protection is satisfactory if no deposit of dust is observable inside the enclosure at the end of the test