빠른 지원
인증된 전문가에게 직접 연결
인증된 전문가에게 직접 연결
VERT. SENSITIVITY FROM 1mV/DIV TO 15V/DIV.
SWEEP RATE FROM 10NS/DIV TO 1S/DIV.
COMPONENT TESTER.
DELAY SWEEP
CE, TUV GS, UL, CUL, IEC1010.
PS-605
| CATHODE RAY TUBE | 6 inch diagonal. rectangular screen with internal graticule 8 x 10 DIV ( 1 DIV = 1 cm ). P31 phosphor. 12 kV accel voltage. |
| VERTICAL DEFLECTION: Bandwidth DC-1 MHz ( -3db ). | |
| Sensitivity: : | 1 mV / DIV -1 V / DIV ( 20 MHz -3db ). x 5 gain selected.5 mV / DIV -5 V / DIV |
| Attenuator: | 1-2-5 sequence. 10 step with variable control. |
| Input Impedance: | 1MΩ / - 2%, 25 pF / - 10 pF |
| Max. Input Voltage: | 400 V ( DC AC peak ). |
| Rise Time: | 5mV / DIV - 5 V / DIV : 5.8 nS 1mV / DIV : 17.5 nS |
| Over Shoot: | Less than / - 5 % |
| Operation Mode: | CH 1, CH 2, DUAL ( ALT, CHOP ). |
| Inverter: | CH 2 only |
| HOLZONTAL DEFLECTION | |
| X-Y Mode: | switch selectable using X-Y switch |
| Accuracy: | + / - 3%. |
| CH 1 : | X axis. |
| CH 2 : | Y axis. |
|
Accuracy: Y - Axis / - 3 % X - Axis / - 6 % |
|
| Bandwidth: | DC - 1 MHz ( -3db ). |
| X-Y Phase Difference: | Approximately 3° at 50 kHz. |
| SWEEP SYSTEM | |
| Sweep Display Mode: | Main, Mix, Delay. |
| Hold Off Time: | 5:1 continuously variable. ( 0.1μ ?S / DIV ) |
| MAIN SWEEP | |
| Sweep Speed: | 0.1 μ S/div to 2S/div in 1-2-5 sequence, 23 steps. |
| Accuracy: | -3 %. |
| Variable Time Control: | 5:1, uncalibrated, continuously variable between steps. |
| Sweep Magnification: | 10X, 10% extend sweep speed up to 10 nS / DIV, |
| DELAY SWEEP | |
| Sweep Speed: | 0.1μ S/ DIV - 2S / DIV in 1-2-5 sequence 23 steps. |
| Accuracy: | - 3%. |
| Sweep Magnification: | 10X, 10% extend sweep speed up to 10nS/DIV. |
| Delay Time Position: | Variable control to located desirable waveform for extending. |
| TRIGGERING | |
| Trigger Coupling: | AUTO NORM. TV-V, TV-H. |
| Trigger Source: | CH 1, CH2, ALT, LINE, EXT |
| Slope: | - |
| TRIGGER SENSITIVITY | COUPLING?? BANDWIDTH???? ? INT?? ? ?EXT TV - V?????? DC - 1 kHz????? ?1.0 DIV? ??0.1 TV - H???? ?1kHz - 100kHz?????1.0 DIV? ? 0.1 AUTO????? 100Hz - 60MHz???1.5 DIV????0.1 NORM??? ? 100Hz - 60MHz???1.5 DIV????0.1 |
| COMPONENT TEST | |
| Test Voltage: | Max. 6 Vrms ( open circuit ). |
| Test Current: | Max. 11 mA ( shorted ). |
| Test Frequency: | Line Frequency |
| Components: | Capacitor, Inductor, Diode, Transistor, Zener etc. |
| CH 2 OUTPUT | |
| Output level: | 100 mV / DIV ( no load ). 50 mV / DIV ( with 50￡[ load ). |
| Bandwidth: | 20 Hz-20 MHz ( -3db ). |
| Gratticule IIIumination: | Adjustable. |
| Calibrator: | Square wave 1 KHz ± 10 %, 2 Vp-p ± 3 % |
| Z-Modulation: | Positive TTL signal, low level blank intensity at any intensity, high level unblank any intensity. |
| Trace Rotation: | Adjustable on front panel. |
| Power Source: | 115/230V AC ± 10%, 50/60 Hz. |
| Power Consumption: | Apporx. 40 Watts. |
| Dimensions: | 824 (W) x 398 (D) x 132 (H) mm. |
| Net Weig.g.ght: | Approx. 7.8 kg. |
| Rated Range of Use: | 10℃ - 35℃, 10-80% R.H. |
| Limits of Operation: | 0℃ - 50℃, 10-80% R.H. |
| Storage Environment: | - 30℃ - 70℃, 10-90% R.H. |
