PW Instruments PW-UCD217-40-5S Five-Station High-Low Temperature Peel Force Tester (50N~1KN)

Capacity: 50N~1KN, 5-station configuration

Temperature Range: -40℃～150℃

Display: Computer display

Force Resolution: 1/1,000,000

Sensor Accuracy: 0.03%

Machine Accuracy Class: Class 0.5

Stroke Resolution: 1/1,000,000

Displacement Accuracy: ±0.01mm

Software Functions: Supports tension, compression, peeling, tearing, release force and other tests

Control Mode: Full computer operation

Temperature Control: PID automatic calculation with stable error

Display Accuracy: 0.01℃

Temperature Accuracy: GB±2℃

Circulation System: Forced air circulation by fan

Heating System: SUS304 stainless steel convection heater

Protection Device: Leakage and overload protector

Cabinet Material: SUS#304 stainless steel

Cooling System: Imported compressor, compact refrigeration system, low failure rate and easy maintenance

Temperature Control: 7-inch touchscreen display, multi-program editing

Humidity Range: 20%~98%RH

Test Stroke: Approx. 40cm; supports testing 5 samples simultaneously

Test Chamber Dimensions: Approx. 100×35×62cm (W×D×H); backward opening available upon request for larger space

Test Speed: 0.1～500mm/min, computer-controlled; equipped with quick fixture adjustment buttons and control box

Force Unit Conversion: kgf, N, lbf, g, ton, MPa

Stop Modes: Overload stop, emergency stop, automatic stop on specimen break, automatic stop at upper/lower limits, automatic reset

Machine Dimensions: Approx. 130×230×230cm (W×D×H)

Drive System: Servo motor, synchronous pulley and precision ball screw drive

Total Power: Approx. 6KW

Machine Weight: Approx. 380kg

Power Supply: 220V 50/60Hz 30A

Standard Accessories: 5 sets of flat peeling fixtures, 20 pieces/box of peeling steel plates, 1 set of software, 1 computer cable; customer-supplied computer

PRODUCTS DETAILS

This machine is widely used in rubber, plastic, polymer, adhesive and tape industries. It performs tests on tensile strength, elongation, compression strength and compressibility of materials under ambient, low and high temperature conditions. Users can easily switch to room‑temperature operation, enabling fast, convenient and multi‑functional testing in one unit.