RAISE3D Pro3 3D Printer

Build Volume (W × D × H) - Single Extruder Print: 300 × 300 × 300 mm (11.8 × 11.8 × 11.8 inch)

Build Volume (W × D × H) - Dual Extruder Print: 255 × 300 × 300 mm (10 × 11.8 × 11.8 inch)

Machine Size (W × D × H): 620 × 626 × 760 mm (24.4 × 24.6 × 29.9 inch)

Net Weight: 56.2 kg (123.9 lbs)

Gross Weight (Carton Only): 67 kg (147.8 lbs)

Gross Weight (Carton with Pallet): 74.5 kg (164.3 lbs)

Power Supply Input: 100-240 V AC, 50/60 Hz 230 V @ 3.3 A

Power Supply Output: 24 V DC, 600 W

Print Technology: Fused Filament Fabrication (FFF)

Print Head System: Dual-head with Electronic Lifting System

Filament Diameter: 1.75 mm

XYZ Step size: 0.78125, 0.78125, 0.078125 micron

Print Head Travel Speed: 15-350 mm/s

Build Plate: Flexible Steel Plate with BuildTak

Max Build Plate Temperature: 120°C

Heated Bed Material: Silicone

Build Plate Leveling: Mesh-leveling with Flatness Detection

Filament Run-out Sensor: Available

Layer Height: Compatible with 0.2, 0.4, 0.6, 0.8 and 1.0 mm nozzles; layer height can vary between 0.05-0.6 mm. Recommended layer height between 0.1-0.3 mm when using 0.4 mm nozzles.

Nozzle Diameter: 0.4 mm (Default), 0.2/ 0.6/ 0.8/ 1.0 mm (Available)

Max Nozzle Temperature: 300°C

Connectivity: Wi-Fi, LAN, USB port, Live Camera

Noise Emission (Acoustic): < 55 dB (A) When Building

Operating ambient Temperature: 15-30°C, 10-90% RH, non-condensing

Storage Temperature: -25°C to +55°C, 10-90% RH, non-condensing

Filter: HEPA Filter with Activated Charcoal

EVE Smart Assistant: Available

Material Type: PLA/ ABS/ ASA/ PETG/ PC/ PETG ESD/ TPU 95A/ PVA+

Third Party Material: Supported by Raise3D OFP (Open Filament Program)

Slicing Software: ideaMaker

Supported File Types: STL/ OBJ/ 3MF/ OLTP

Supported OS: Windows/ macOS/ Linux

Machine Code Type: GCODE

User Interface: 7-inch Touch Screen

Network: Wi-Fi, Ethernet

Power Loss Recovery: Available

Screen Resolution: 1024 × 600

Motion Controller: Atmel ARM Cortex-M4 120 MHz FPU

Logic Controller: NXP ARM Cortex-A9 Quad 1 GHz

Memory: 1 GB

Onboard Flash: 16 GB

OS: Embedded Linux

Ports: USB 2.0 × 2, Ethernet × 1