RIGOL DS7034 Digital Oscilloscope

Analog Bandwidth 350 MHz
Rising time (typical) ≤1 ns
No. of Input/Output Channels 4 input analog channels
Max. Sample Rate of
Analog Channel 10 GSa/s (single-channel), 5 GSa/s (dual-channel), 2.5 GSa/s (four-channel)
Max. Memory Depth
analog channel: 500 Mpts (single-channel), 250 Mpts (dual-channel), 125 Mpts (four-channel)
digital channel: 62.5 Mpts (all channels)
Max. Waveform Capture
Rate[1] ≥600,000 wfms/s
Hardware real-time
waveform recording and
playing
≥450,000 wfms (single-channel)
Peak Detection under all the time base settings, capture 400 ps glitches
LCD Size and Type 10.1-inch capacitive multi-touch screen/gesture enabled operation
Display Resolution 1024 × 600
Vertical System Analog Channel
Input Coupling DC or AC
Input Impedance 1 MΩ ± 1%, 50 Ω ± 1%
Input Capacitance 17 pF ± 3 pF
Probe Attenuation Coefficient 0.01X, 0.02X, 0.05X, 0.1X, 0.2X, 0.5X, 1X, 2X, 5X, 10X, 20X, 50X, 100X, 200X, 500X, and 1000X
Probe Recognition auto-recognized RIGOL probe
Maximum Input Voltage
1 MΩ CAT I 300 Vrms, 400 Vpk, Transient Overvoltage 1600 Vpk
Vertical Resolution 8 bits
Vertical Sensitivity
1 MΩ :1 mV/div ~ 10 V/div
50 Ω :1 mV/div ~ 1 V/div
I/O
USB 2.0 Hi-speed Host Port 4 (3 on the front panel and 1 on the rear panel)
USB 2.0 Hi-speed Device Port 1 on the rear panel, compatible with USB Test and Measurement Class (USBTMC)
LAN 1 on the rear panel, 10/100/1000-port, supporting LXI-C
GPIB GPIB-USB adapter (option)
Web Remote Control Support VNC Web interface (input the IP address of the oscilloscope into the Web browser to
display the operation interface of the oscilloscope)
HDMI video output 1 on the rear panel, HDMI 1.4b, A plug. used to connect to an external monitor or projector
Power Supply
Power Voltage 100 V-240 V, 45 Hz-440 Hz
Power Max. 200 W (connect to various interfaces, USB, and active probes)
Fuse 3.15 A, T degree, 250 V
Mechanical Characteristics
Dimensions[3] 410 mm (W)×224 mm (H)×135 mm (D)
Weight[4] Package Excluded <3.9 kg
Package Included <7.1 kg
Rack Mount Kit 6U
Standard Accessories
Power cord conforming to the standard of the destination country -
USB cable CB-USBA-USBB-FF-150
4 passive probes (500 MHz) RP3500A
1 logic analyzer probe (only for MSO model) RPL2316
Front panel cover DS7000-FPC
Quick guide (hard copy)

Download datasheet