Samyon HLN200 다기능 Leeb 경도 시험기 (170～960 HLD)

Application range:

 For testing on large and heavy workpieces or installed permanent parts

 For testing in narrow and small spaces where it is not easy to test for bench type hardness testers

 It is suitable to determinethe Leeb hardness of ferrous and non-ferrous metals precisely.

 Itfeatures high applicability and is widely used in producing workshop for quality control.

Specifications:

   Measuring accuracy: ± 4 HLD

   Hardness repeatability: ± 4 HLD

   Measuring range: 170～960 HLD

   Testing direction: arbitrary 

   Hardness conversion: HRC, HRB, HB, HV, HSD & tensile strength

   LCD display: 3.9" LCD, 240 x 320 pixels resolution (touch screen)

   Data storage: 800 groups

   Upper & lower limit range: same as measuring range

   Working voltage: 3.7V (lithium rechargeable battery)

   Working time: 4-8 hours

   Charging power: DC 5.5V/1A

   Continuous working time after one charging: about 30 hours (backlight not on)

   Working temperature: 0 °C～+50°C  

   Working humidity: 20%～85%

   Storage temperature: -30 °C ～+70 °C  

   Storage humidity: 5%～95%　

   Dimensions: 180 x 90 x 30mm  

   Weight: 350g (including impact device)

   Packing dimensions:  368 x 247 x 87mm  

   Total weight: Approx. 5.5Kg　

   Heatsensitive printer:

   Width of print paper: 57.5± 0.5mm

   Diameter of paper roll: ≤30mm (Heatsensitive print paper)

   Printing speed: 5cm/sec. (when power is enough)

   Printing resolution: 203dpi (8dot/mm)

   Working power supply: 650mAh 7.2V rechargeable NiMH

   Recharging power supply: DC 12V/1A

   Dimensions: 90 x 76 x 36mm  

   Weight: 220g (not including paper roll)

   Working temperature: -20 °C ～+50 °C  

   Working humidity: 20%～85%

   Storage temperature: -30 °C ～+70 °C  

   Storage humidity: 5%～95%  

Standard accessories:

   Heatsensitive mini-printer: 1 pc.

   D type impact device: 1 pc.

   Small support ring: 1 pc.

   Leeb standardized block: 1 pc.

   Charger: 1 pc.(For both main machine and printer)

   Nylon brush: 1 pc.