SCHMIDT KXE-20K Tension Meter (0.50 – 20.00 daN)
Tension Range: 0.50 – 20.00 daN
Resolution: 0.01 daN
SCHMIDT Calibration Material*: fabric tape
Display unit
Calibration: According to Schmidt factory procedure
Accuracy:
+ for 10 % to 90 % of range: ±1 % full scale and ±1 digit
+ for remainder of range: ±3 % full scale and ±1 digit
Measuring unit: daN
Overrange: 10 % full scale, without accuracy guarantee
Overload protection: 200 % full scale
Measuring principle: Strain gauge bridge
Signal processing: Digital 24 bit A/D converter
Damping: Adjustable electronic damping (Moving averaging)
Measuring frequency internal: Approx. 1 kHz internal
Measuring frequency: 100 Hz: MIN-Peak and MAX-Peak, 2 Hz: AVG, MIN, MAX
Display: 4 digit, 11 mm high
Display update time: Approx. 2 times per second
Memory: Max. 4000 values plus statistics
Output signal: USB
Communications frequency: Max. 100 readings/sec
Connection cable: Sensor to display unit 1.5 m
Temperature coefficient: Gain: less than ± 0.01 % full scale /°C
Temperature range: 10 – 45 ºC
Air humidity: 85 % RH, max.
Auto power off: Approx. after 3 minutes of non-use
Power supply: LiPo accumulator (approx. 60 h continuous use, charging time approx. 3.5 h), USB AC adapter 100 – 240 V AC with 4 adapters (EU/USA/UK/AUS-NZ)
Housing material: Aluminium profile with plastic outer casing (PVC)
Dimensions: See dimensions
Weight net: Approx. 340 g
Sensor
Measuring rollers: 2 x 22 mm ball bearing rollers, total 50 mm
Width of outer rollers: 100 mm (ball bearing rollers)
Reference frame height adjustment: 24 mm
Material: Anodized aluminium
Reference frame dimensions: 108 x 138 mm
Weight, net: Approx. 1000 g
Total weight gross: Approx. 1800 g
* Suitable for 95 % of applications
Delivery Includes: transport packaging, USB AC adapter with 4 adapters (EU/USA/UK/AUS-NZ), USB cable, software »Tension Inspect 3«, operating instruction in German or English (as requested) and Certificate of Compliance with the order 2.1 according EN 10204 free of charge
인증된 전문가에게 직접 연결